You broke my GPS stats. The 450AP I updated does not read the Motorola
binary GPS data from the attached SyncPipe anymore. And there are other
bugs, maybe just GUI/display issues though. I sent the info to Aaron, go
beat him up for me. The GPS data issue needs to be fixed before I can
update any more sectors.
Other than that, I'm impressed with the RF performance w/ MIMO-A. It
seems to have really helped with all the multipath/fading/ducting and
sessions dropping we've been seeing at night. And throughput got a lot
better in most cases.
On 9/30/2014 1:49 PM, Jonathan Mandziara via Af wrote:
Folks,
Does anyone have any 13.2 Beta feedback that they would like to share
with the list?
Best,
Jonathan
*From:*Af
[mailto:[email protected]]
*On Behalf Of *Jonathan Mandziara via Af
*Sent:* Thursday, September 25, 2014 9:32 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] New PMP beta load 13.2 Build 30 available!
Folks,
PMP Beta 13.2 Build 30 is also there for PMP430 and PTP230 devices.
Please download it and let us know what you think.
Best,
Jonathan
*From:*Af
[mailto:[email protected]]
*On Behalf Of *canopy01 via Af
*Sent:* Monday, September 22, 2014 11:38 AM
*To:* Cambium Dist_List ([email protected] <mailto:[email protected]>)
*Subject:* [AFMUG] New PMP beta load 13.2 Build 30 available!
Folks,
PMP Beta load 13.2 Build 30 is now available for download and you can
find it here:
https://support.cambiumnetworks.com/files/pmp450
* Improvements for MIMO-A
o PMP450 APs & SMs will now default to MIMO-A control message mode
o If you have an interop sector (containing 430 SMs), you may
need to set this back to legacy SISO mode
+ Configuration -> Radio -> PMP 430 Interop Mode, set to SISO
+ This is only necessary if you have issues with existing
PMP430�s reconnecting and should not be necessary in a
majority of the cases.
* Fix for missing "None" frequency option
* Control Slots is now called Contention Slots
* Addition of "Color Code Priority" column to the Session Status ->
Session tab
o If Color Code Rescan option is enabled on the AP, and an SM is
registered via a non-primary color code, there will be a
countdown for each SM that will be rescanning due to this
configuration.
o If an SM is registered via Installation Color Code (ICC), this
will also be noted on the Session Status -> Device tab,
Session column, next to "In Session"
* Added number of VCs in use next to Subscriber Count on the AP's
main page. This number includes Broadcast and Multicast (if
enabled) VCs.
* Added support to NAT to handle fragments (to fix the FemtoCell issue)
* Alignment tone fix
* Various bug fixes
Corey
