An upcoming release is supposed to have a pre-populated list of
channels, but you'll still be able to add the custom frequencies if you
need/want to.
I don't recall which version is supposed to have that.
Why do we have to enter custom frequencies for 365?
Also 365 SM's seem to get stuck when doing a site survey it will link
at -75 then don't matter if you put the SM on ground signal won't
update until you do a capacity test
Been liking the Mimo-A drop down support but it has a bug in it where
it will try and achieve higher modulation and then drop so there is
still more to do on your algorithm for that but have a very good start
—
Sent from Mailbox <https://www.dropbox.com/mailbox>
On Tue, Sep 30, 2014 at 3:11 PM, George Skorup (Cyber Broadcasting)
via Af <[email protected] <mailto:[email protected]>> wrote:
You broke my GPS stats. The 450AP I updated does not read the
Motorola binary GPS data from the attached SyncPipe anymore. And
there are other bugs, maybe just GUI/display issues though. I sent
the info to Aaron, go beat him up for me. The GPS data issue needs
to be fixed before I can update any more sectors.
Other than that, I'm impressed with the RF performance w/ MIMO-A.
It seems to have really helped with all the
multipath/fading/ducting and sessions dropping we've been seeing
at night. And throughput got a lot better in most cases.
On 9/30/2014 1:49 PM, Jonathan Mandziara via Af wrote:
Folks,
�
Does anyone have any 13.2 Beta feedback that they would like to
share with the list?
�
Best,
�
Jonathan
�
*From:*Af
[mailto:[email protected]]
*On Behalf Of *Jonathan Mandziara via Af
*Sent:* Thursday, September 25, 2014 9:32 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] New PMP beta load 13.2 Build 30 available!
�
Folks,
�
PMP Beta 13.2 Build 30 is also there for PMP430 and PTP230
devices.� Please download it and let us know what you think.
�
Best,
�
Jonathan
�
*From:*Af
[mailto:[email protected]]
*On Behalf Of *canopy01 via Af
*Sent:* Monday, September 22, 2014 11:38 AM
*To:* Cambium Dist_List ([email protected] <mailto:[email protected]>)
*Subject:* [AFMUG] New PMP beta load 13.2 Build 30 available!
�
Folks,
�
PMP Beta load 13.2 Build 30 is now available for download and you
can find it here:
�
https://support.cambiumnetworks.com/files/pmp450
�
* Improvements for MIMO-A
o PMP450 APs & SMs will now default to MIMO-A control
message mode
o If you have an interop sector (containing 430 SMs), you
may need to set this back to legacy SISO mode
+ Configuration -> Radio -> PMP 430 Interop Mode, set
to SISO
+ This is only necessary if you have issues with
existing PMP430�s reconnecting and should not be
necessary in a majority of the cases.
* Fix for missing "None" frequency option
* Control Slots is now called Contention Slots
* Addition of "Color Code Priority" column to the Session
Status -> Session tab
o If Color Code Rescan option is enabled on the AP, and an
SM is registered via a non-primary color code, there will
be a countdown for each SM that will be rescanning due to
this configuration.
o If an SM is registered via Installation Color Code (ICC),
this will also be noted on the Session Status -> Device
tab, Session column, next to "In Session"
* Added number of VCs in use next to Subscriber Count on the
AP's main page. �This number includes Broadcast and
Multicast (if enabled) VCs.
* Added support to NAT to handle fragments (to fix the
FemtoCell issue)
* Alignment tone fix
* Various bug fixes
�
�
Corey
�
�
