That really bothers me too... the AP side will limit it to the legal limit (assuming you have the antenna size set properly), but the clients do not... I'm guessing there are an awful lot of NanoBridges out there running at 23dBm Tx power on DFS channels - which should be limited to 5dBm.
UBNT really needs to fix that. ________________________________ From: Af [[email protected]] on behalf of That One Guy via Af [[email protected]] Sent: Wednesday, October 22, 2014 2:34 PM To: [email protected] Subject: Re: [AFMUG] Rocket M5 and 5.2 band? I dont like that theyre not limiting power in those bands automatically, I thought they were supposed to On Wed, Oct 22, 2014 at 2:17 PM, Jason McKemie via Af <[email protected]<mailto:[email protected]>> wrote: I didn't know the 5GHz Power Bridges ever had the ability to go that low (legally). On Wed, Oct 22, 2014 at 1:44 PM, Heith Petersen via Af <[email protected]<mailto:[email protected]>> wrote: I assume that this does not apply to the Power Bridges. I am scared to update the few that are running 5.2 on older firmware to find out ;) From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Bill Prince via Af Sent: Wednesday, October 22, 2014 1:33 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Rocket M5 and 5.2 band? Go to the UBNT web site. You have to register & they will send you stickers and an activation key that you enter on the System tab in the GUI. bp On 10/22/2014 9:51 AM, Sam Lambie via Af wrote: Where the heck would one get an update key and how do you enter it into the radio? These radios are about 3 years old. This particular one worked just fine on Firmware 5.3 in 5.2... On Wed, Oct 22, 2014 at 10:49 AM, Glen Waldrop via Af <[email protected]<mailto:[email protected]>> wrote: I don't know. I've got ~9 Nanobridge M5 out there feeding towers on short hops, all listed UNII1 and half the links are running it. Is this possibly an older unit before the UNII 2 band was enabled from factory? I wonder if the update key has to be entered to access UNII 1. ----- Original Message ----- From: Sam Lambie via Af<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Sent: Wednesday, October 22, 2014 11:46 AM Subject: Re: [AFMUG] Rocket M5 and 5.2 band? Ok, I have a radio on the bench with 5.5.10 loaded and all I see is the 5.8 band in AP mode. what am I missing? On Wed, Oct 22, 2014 at 10:34 AM, Glen Waldrop via Af <[email protected]<mailto:[email protected]>> wrote Works quite nicely. I've got a few out there. Nice to have 500+ MHz between feeds. ----- Original Message ----- From: Mike Hammett via Af<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Sent: Wednesday, October 22, 2014 11:32 AM Subject: Re: [AFMUG] Rocket M5 and 5.2 band? Firmware 5.5.10 (actually, one of its betas was the first to offer it). ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Sam Lambie via Af" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Wednesday, October 22, 2014 11:30:14 AM Subject: [AFMUG] Rocket M5 and 5.2 band? I heard somewhere at WISPApalooza that the M series does 5.2 band now? Is that smoke and mirrors? Sam -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598<tel:575-758-7598> Office www.Taosnet.com<http://www.newmex.com> -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598<tel:575-758-7598> Office www.Taosnet.com<http://www.newmex.com> -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598<tel:575-758-7598> Office www.Taosnet.com<http://www.newmex.com> -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
