We just went through this a couple months ago. Process was
straightforward. Upgrade to 01-21, then add the key to allow those
frequencies. Bada bing.
bp
<part-15@SkylineBroadbandService>
On 11/12/2014 2:59 PM, Mathew Howard via Af wrote:
That's odd... I wonder if you have to do something else to enable it.
------------------------------------------------------------------------
*From:* Af [[email protected]] on behalf of That One Guy via Af
[[email protected]]
*Sent:* Wednesday, November 12, 2014 4:52 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] 5.1 PMP rules
im on 1-21 it only has the option for 5.2 .54 and 5.8 in the GUI,
maybe im missing something
Does anyone have a link to an accurate up to date cheatsheet for the
entire 5ghz band and its subsets?
On Wed, Nov 12, 2014 at 4:44 PM, Mathew Howard via Af <[email protected]
<mailto:[email protected]>> wrote:
I'm pretty sure I got an email from Cambium awhile back saying it
did...
yeah, here it is... looks like it needs a license key to enable
it.
http://www.cambiumnetworks.com/pressreleases/2014/07/28/cambium-networks-ptp-650-receives-fcc-grant-to-operate-in-5150-to-5250-mhz
------------------------------------------------------------------------
*From:* Af [[email protected] <mailto:[email protected]>] on
behalf of That One Guy via Af [[email protected] <mailto:[email protected]>]
*Sent:* Wednesday, November 12, 2014 4:36 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5.1 PMP rules
crud, 650 doesnt do 5.1, that is disappointing
On Wed, Nov 12, 2014 at 4:34 PM, That One Guy via Af <[email protected]
<mailto:[email protected]>> wrote:
cambium linkplanner is locking it at 36 on ptp
I havent looked on the ptp650 to see if its locked
Man i hope somebody can provide some evidence that it can go
up to 53, that would get a pretty big load of my back right now
On Wed, Nov 12, 2014 at 4:31 PM, Mathew Howard via Af
<[email protected] <mailto:[email protected]>> wrote:
That's definitely not right... maybe you have numbers from
the old 5150-5250 rules?
PtMP is 36dBm EIRP, and PtP is 53dBm EIRP - however,
because of the OOBE stuff, I'm not aware of anything that
can actually do 53dBm. Ubiquiti stuff is all limited to
36dBm, ePMP lets me set the Tx power up to 20dBm with the
antenna size set to 30dBi (in PtP mode).
------------------------------------------------------------------------
*From:* Af [[email protected]
<mailto:[email protected]>] on behalf of That One Guy
via Af [[email protected] <mailto:[email protected]>]
*Sent:* Wednesday, November 12, 2014 4:24 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5.1 PMP rules
Really? My cheetsheet shows much lower EIRPs - 22 on PtP
and 16 on PmP!!
On Wed, Nov 12, 2014 at 4:04 PM, Dan Petermann via Af
<[email protected] <mailto:[email protected]>> wrote:
awesome, Thank you
On Nov 12, 2014, at 2:58 PM, George Skorup (Cyber
Broadcasting) via Af <[email protected]
<mailto:[email protected]>> wrote:
> 36dBm PtMP. 53dBm PtP. I assume the SM qualifies as
PTP like 5.7. And no DFS.
>
> On 11/12/2014 3:53 PM, Dan Petermann via Af wrote:
>> Can someone give me a quick list of eirp rules in
the 5.1 band for multipoint?
>
--
All parts should go together without forcing. You must
remember that the parts you are reassembling were
disassembled by you. Therefore, if you can't get them
together again, there must be a reason. By all means, do
not use a hammer. -- IBM maintenance manual, 1925
--
All parts should go together without forcing. You must
remember that the parts you are reassembling were disassembled
by you. Therefore, if you can't get them together again, there
must be a reason. By all means, do not use a hammer. -- IBM
maintenance manual, 1925
--
All parts should go together without forcing. You must remember
that the parts you are reassembling were disassembled by you.
Therefore, if you can't get them together again, there must be a
reason. By all means, do not use a hammer. -- IBM maintenance
manual, 1925
--
All parts should go together without forcing. You must remember that
the parts you are reassembling were disassembled by you. Therefore, if
you can't get them together again, there must be a reason. By all
means, do not use a hammer. -- IBM maintenance manual, 1925
