oh glorious day! On Wed, Nov 12, 2014 at 5:36 PM, Bill Prince via Af <[email protected]> wrote:
> We just went through this a couple months ago. Process was > straightforward. Upgrade to 01-21, then add the key to allow those > frequencies. Bada bing. > > bp > <part-15@SkylineBroadbandService> > > > On 11/12/2014 2:59 PM, Mathew Howard via Af wrote: > > That's odd... I wonder if you have to do something else to enable it. > > ------------------------------ > *From:* Af [[email protected]] on behalf of That One Guy via Af [ > [email protected]] > *Sent:* Wednesday, November 12, 2014 4:52 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 5.1 PMP rules > > im on 1-21 it only has the option for 5.2 .54 and 5.8 in the GUI, maybe > im missing something > > Does anyone have a link to an accurate up to date cheatsheet for the > entire 5ghz band and its subsets? > > On Wed, Nov 12, 2014 at 4:44 PM, Mathew Howard via Af <[email protected]> > wrote: > >> I'm pretty sure I got an email from Cambium awhile back saying it did... >> >> yeah, here it is... looks like it needs a license key to enable it. >> http://www.cambiumnetworks.com/pressreleases/2014/07/28/cambium-networks-ptp-650-receives-fcc-grant-to-operate-in-5150-to-5250-mhz >> ------------------------------ >> *From:* Af [[email protected]] on behalf of That One Guy via Af [ >> [email protected]] >> *Sent:* Wednesday, November 12, 2014 4:36 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] 5.1 PMP rules >> >> crud, 650 doesnt do 5.1, that is disappointing >> >> On Wed, Nov 12, 2014 at 4:34 PM, That One Guy via Af <[email protected]> >> wrote: >> >>> cambium linkplanner is locking it at 36 on ptp >>> I havent looked on the ptp650 to see if its locked >>> Man i hope somebody can provide some evidence that it can go up to 53, >>> that would get a pretty big load of my back right now >>> >>> On Wed, Nov 12, 2014 at 4:31 PM, Mathew Howard via Af <[email protected]> >>> wrote: >>> >>>> That's definitely not right... maybe you have numbers from the old >>>> 5150-5250 rules? >>>> >>>> PtMP is 36dBm EIRP, and PtP is 53dBm EIRP - however, because of the >>>> OOBE stuff, I'm not aware of anything that can actually do 53dBm. Ubiquiti >>>> stuff is all limited to 36dBm, ePMP lets me set the Tx power up to 20dBm >>>> with the antenna size set to 30dBi (in PtP mode). >>>> ------------------------------ >>>> *From:* Af [[email protected]] on behalf of That One Guy via Af [ >>>> [email protected]] >>>> *Sent:* Wednesday, November 12, 2014 4:24 PM >>>> *To:* [email protected] >>>> *Subject:* Re: [AFMUG] 5.1 PMP rules >>>> >>>> Really? My cheetsheet shows much lower EIRPs - 22 on PtP and 16 on >>>> PmP!! >>>> >>>> >>>> On Wed, Nov 12, 2014 at 4:04 PM, Dan Petermann via Af <[email protected]> >>>> wrote: >>>> >>>>> awesome, Thank you >>>>> >>>>> On Nov 12, 2014, at 2:58 PM, George Skorup (Cyber Broadcasting) via Af >>>>> <[email protected]> wrote: >>>>> >>>>> > 36dBm PtMP. 53dBm PtP. I assume the SM qualifies as PTP like 5.7. >>>>> And no DFS. >>>>> > >>>>> > On 11/12/2014 3:53 PM, Dan Petermann via Af wrote: >>>>> >> Can someone give me a quick list of eirp rules in the 5.1 band for >>>>> multipoint? >>>>> > >>>>> >>>>> >>>> >>>> >>>> -- >>>> All parts should go together without forcing. You must remember that >>>> the parts you are reassembling were disassembled by you. Therefore, if you >>>> can't get them together again, there must be a reason. By all means, do not >>>> use a hammer. -- IBM maintenance manual, 1925 >>>> >>> >>> >>> >>> -- >>> All parts should go together without forcing. You must remember that >>> the parts you are reassembling were disassembled by you. Therefore, if you >>> can't get them together again, there must be a reason. By all means, do not >>> use a hammer. -- IBM maintenance manual, 1925 >>> >> >> >> >> -- >> All parts should go together without forcing. You must remember that >> the parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> > > > > -- > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 > > > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
