Maximum it lets me go to in 5.8 GHz is 68 dBm. This is using a
connectorized PTP650, and a 15' parabolic dish.
bp
<part-15@SkylineBroadbandService>
On 11/12/2014 2:34 PM, That One Guy via Af wrote:
cambium linkplanner is locking it at 36 on ptp
I havent looked on the ptp650 to see if its locked
Man i hope somebody can provide some evidence that it can go up to 53,
that would get a pretty big load of my back right now
On Wed, Nov 12, 2014 at 4:31 PM, Mathew Howard via Af <[email protected]
<mailto:[email protected]>> wrote:
That's definitely not right... maybe you have numbers from the old
5150-5250 rules?
PtMP is 36dBm EIRP, and PtP is 53dBm EIRP - however, because of
the OOBE stuff, I'm not aware of anything that can actually do
53dBm. Ubiquiti stuff is all limited to 36dBm, ePMP lets me set
the Tx power up to 20dBm with the antenna size set to 30dBi (in
PtP mode).
------------------------------------------------------------------------
*From:* Af [[email protected] <mailto:[email protected]>] on
behalf of That One Guy via Af [[email protected] <mailto:[email protected]>]
*Sent:* Wednesday, November 12, 2014 4:24 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5.1 PMP rules
Really? My cheetsheet shows much lower EIRPs - 22 on PtP and 16 on
PmP!!
On Wed, Nov 12, 2014 at 4:04 PM, Dan Petermann via Af
<[email protected] <mailto:[email protected]>> wrote:
awesome, Thank you
On Nov 12, 2014, at 2:58 PM, George Skorup (Cyber
Broadcasting) via Af <[email protected] <mailto:[email protected]>> wrote:
> 36dBm PtMP. 53dBm PtP. I assume the SM qualifies as PTP like
5.7. And no DFS.
>
> On 11/12/2014 3:53 PM, Dan Petermann via Af wrote:
>> Can someone give me a quick list of eirp rules in the 5.1
band for multipoint?
>
--
All parts should go together without forcing. You must remember
that the parts you are reassembling were disassembled by you.
Therefore, if you can't get them together again, there must be a
reason. By all means, do not use a hammer. -- IBM maintenance
manual, 1925
--
All parts should go together without forcing. You must remember that
the parts you are reassembling were disassembled by you. Therefore, if
you can't get them together again, there must be a reason. By all
means, do not use a hammer. -- IBM maintenance manual, 1925
