That was a base2 though right? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 26, 2014 12:59 AM, "Jeremy via Af" <[email protected]> wrote:
> I actually had to use this tool on a site tonight. I used the new > Ethernet Upgrade Tool for windows, was directly connected to the Ethernet > port on my laptop. I pressed 'yeah I have read the blah blah blah' and > then hit discover, it told me to reboot. I disconnected power 1 and 2 for > a sec and when I plugged it back in it gave me the IP. Then I couldn't > figure out the SNMP so I had to use it again to reset, same process. It > worked perfectly both times. > > On Mon, Nov 24, 2014 at 7:28 AM, Josh Luthman via Af <[email protected]> wrote: > >> Not sure what email address to use offlist... >> >> I've done all that several times to confirm. I also went straight to the >> NIC as well as trying a Netgear dumb switch (it had link light, doesn't >> specify speed/duplex). >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Mon, Nov 24, 2014 at 3:33 AM, Forrest Christian (List Account) via Af >> <[email protected]> wrote: >> >>> Unfortunately there's quite a few things which will break the tool. >>> I've attached a .pdf which should cover all of them. Make sure you have >>> the right tool as described, and if you have problems afterwards let me >>> know. >>> >>> -forrest >>> >> >> >
