I tried one of each. No combo worked. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 26, 2014 8:34 AM, "Jeremy via Af" <[email protected]> wrote:
> Yeah, I must have missed that part. Is this one of the old site monitors? > > On Wed, Nov 26, 2014 at 6:04 AM, Josh Luthman via Af <[email protected]> wrote: > >> That was a base2 though right? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Nov 26, 2014 12:59 AM, "Jeremy via Af" <[email protected]> wrote: >> >>> I actually had to use this tool on a site tonight. I used the new >>> Ethernet Upgrade Tool for windows, was directly connected to the Ethernet >>> port on my laptop. I pressed 'yeah I have read the blah blah blah' and >>> then hit discover, it told me to reboot. I disconnected power 1 and 2 for >>> a sec and when I plugged it back in it gave me the IP. Then I couldn't >>> figure out the SNMP so I had to use it again to reset, same process. It >>> worked perfectly both times. >>> >>> On Mon, Nov 24, 2014 at 7:28 AM, Josh Luthman via Af <[email protected]> >>> wrote: >>> >>>> Not sure what email address to use offlist... >>>> >>>> I've done all that several times to confirm. I also went straight to >>>> the NIC as well as trying a Netgear dumb switch (it had link light, doesn't >>>> specify speed/duplex). >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Mon, Nov 24, 2014 at 3:33 AM, Forrest Christian (List Account) via >>>> Af <[email protected]> wrote: >>>> >>>>> Unfortunately there's quite a few things which will break the tool. >>>>> I've attached a .pdf which should cover all of them. Make sure you have >>>>> the right tool as described, and if you have problems afterwards let me >>>>> know. >>>>> >>>>> -forrest >>>>> >>>> >>>> >>> >
