Yeah, I must have missed that part. Is this one of the old site monitors? On Wed, Nov 26, 2014 at 6:04 AM, Josh Luthman via Af <[email protected]> wrote:
> That was a base2 though right? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Nov 26, 2014 12:59 AM, "Jeremy via Af" <[email protected]> wrote: > >> I actually had to use this tool on a site tonight. I used the new >> Ethernet Upgrade Tool for windows, was directly connected to the Ethernet >> port on my laptop. I pressed 'yeah I have read the blah blah blah' and >> then hit discover, it told me to reboot. I disconnected power 1 and 2 for >> a sec and when I plugged it back in it gave me the IP. Then I couldn't >> figure out the SNMP so I had to use it again to reset, same process. It >> worked perfectly both times. >> >> On Mon, Nov 24, 2014 at 7:28 AM, Josh Luthman via Af <[email protected]> >> wrote: >> >>> Not sure what email address to use offlist... >>> >>> I've done all that several times to confirm. I also went straight to >>> the NIC as well as trying a Netgear dumb switch (it had link light, doesn't >>> specify speed/duplex). >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Mon, Nov 24, 2014 at 3:33 AM, Forrest Christian (List Account) via Af >>> <[email protected]> wrote: >>> >>>> Unfortunately there's quite a few things which will break the tool. >>>> I've attached a .pdf which should cover all of them. Make sure you have >>>> the right tool as described, and if you have problems afterwards let me >>>> know. >>>> >>>> -forrest >>>> >>> >>> >>
