As far as I know, we have not changed prices in a couple of years. From: That One Guy Sent: Thursday, January 22, 2015 11:43 PM To: [email protected] Subject: Re: [AFMUG] WBMFG quality going up! Buy buy buy!
we were robbing the angled clamp from sitepro upc1 to fot the angle on the elevator platforms, then a backer pipe inside. but it turned out we were getting the mtows way cheaper than we were supposed to, when the price went to msrp, we went exclusively to upc1. wanna bet which sites will fail first? i really liked the mtows On Fri, Jan 23, 2015 at 12:02 AM, Jeremy <[email protected]> wrote: On our grain elevator (almost identical), I drilled holes through the railing and used U-bolts to mount pipes. It worked out slick. I don't have a closeup handy. On Thu, Jan 22, 2015 at 9:22 PM, Ken Hohhof <[email protected]> wrote: Note these are formed heavy sheet metal and you can’t just crank a clamp made for a round pipe down on them. From: Mathew Howard Sent: Thursday, January 22, 2015 8:54 PM To: af Subject: Re: [AFMUG] WBMFG quality going up! Buy buy buy! Yes! that could be very useful. On Thu, Jan 22, 2015 at 7:26 PM, Ken Hohhof <[email protected]> wrote: How about MTOW or pipe-to-pipe-clamp variants to attach to the L and U channels we find on some grain legs, both vertical and horizontal, could also be used to attach pipes to various handrails. From: Josh Luthman Sent: Thursday, January 22, 2015 6:57 PM To: [email protected] Subject: Re: [AFMUG] WBMFG quality going up! Buy buy buy! Wisp boxes. I like that. Built in DIN. On Jan 22, 2015 7:49 PM, "Chuck Hogg" <[email protected]> wrote: How about larger pipes on the mounts? Like a 2-3"? Sector Frames? I know you do injection molding for your antennas, have you ever thought about doing NEMA style boxes? Just some ideas to throw around... Regards, Chuck On Thu, Jan 22, 2015 at 4:14 PM, <[email protected]> wrote: Thanks, wish I could take total credit. The quality of the hot dip galvanize job is a bit out of our hands. The amount of dross on the pot, temperature of the day, mix of zinc and other things as well as freshness of the pickling tank and pickling time all go into the quality of the galvanization and we farm that out to a local company. We have been working on the fit and inspection. I appreciate the note, we do try. And we are always up for making other hot dipped tower products. Anyone want us to add to the product line, let me know and I will see if I can improve on the price or performance on any other product out in the world. I prefer to do custom stuff nobody else does, but I am not above knocking off something if I can offer something in the way of design improvement or cost reduction. From: Josh Luthman Sent: Thursday, January 22, 2015 1:25 PM To: [email protected] Subject: [AFMUG] WBMFG quality going up! Buy buy buy! Props to WB for improving their MTOWs. Most notably the cleaner galvanizing and the hardware fitting together perfectly. Not a huge difference since these products have already been great, but the quality bonus is noticeable and appreciated! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
