AF5X? 



----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 



----- Original Message -----

From: "Kurt Fankhauser" <[email protected]> 
To: [email protected] 
Sent: Friday, February 13, 2015 10:23:56 PM 
Subject: Re: [AFMUG] Trango Altum AC PTP test results 


I can't afford 8-12ms of latency 7 hops out... Time for some Full Duplex links 
I suppose.... 







Kurt Fankhauser 
Wavelinc Communications 
P.O. Box 126 
Bucyrus, OH 44820 
http://www.wavelinc.com 
tel. 419-562-6405 
fax. 419-617-0110 

On Fri, Feb 13, 2015 at 10:43 PM, Erich Kaiser < [email protected] > 
wrote: 



The Mimosa seems awesome so far (Except for lack of SNMP support, which is 
coming in April). If you have GPS sync it seems to run between 8ms-12ms. 




Erich Kaiser 
North Central Tower Consulting 
[email protected] 
Office: 630-621-4804 
Cell: 630-777-9291 

On Fri, Feb 13, 2015 at 9:29 PM, Kurt Fankhauser < [email protected] > wrote: 

<blockquote>

I was hoping to replace a Ligowave link I have that's running on 40mhz. I don't 
feel like burning up a whole 80mhz of spectrum through, so I think I'll be 
buying a PTP-650 especially since I need DFS freq's. 







Kurt Fankhauser 
Wavelinc Communications 
P.O. Box 126 
Bucyrus, OH 44820 
http://www.wavelinc.com 
tel. 419-562-6405 
fax. 419-617-0110 



On Fri, Feb 13, 2015 at 10:19 PM, Jeremy < [email protected] > wrote: 

<blockquote>

I see that they sell them on the 'Trango store' now too. Pretty sweet. 


On Fri, Feb 13, 2015 at 8:17 PM, Jeremy < [email protected] > wrote: 

<blockquote>

Yeah, that is what I was told at Animal Farm also. It seems like doing 
something specific or something in the wrong order makes them not work. Next 
time I guess I'll have to follow directions, LOL. 




On Fri, Feb 13, 2015 at 8:11 PM, Kurt Fankhauser < [email protected] > wrote: 

<blockquote>


Jeremy, 


I ended up having to default the units and then follow the quick start guide to 
the T. There must be some bugs to work out in the firmware cause when I ordered 
them the guy told me to follow the quick start to the T. 







Kurt Fankhauser 
Wavelinc Communications 
P.O. Box 126 
Bucyrus, OH 44820 
http://www.wavelinc.com 
tel. 419-562-6405 
fax. 419-617-0110 



On Fri, Feb 13, 2015 at 9:59 PM, Jeremy < [email protected] > wrote: 

<blockquote>

I also didn't follow the guide the first time. On subsequent attempts I did, 
but it seemed like something was wrong with them at that point. Anyway, it's 
nice to see someone having some success. The platform looks like it has a lot 
of potential. 


On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser < [email protected] > wrote: 



<blockquote>


Jeremy, 


Yes I had issues but I didn't call support. It took me almost 2 hours to get 
the two radios to see each other but I finally got them too. I wasn't following 
the PTP quick start guide like I was told to. When I initially configured the 
radios I disabled the 2nd port (called WAN) in the manual. For some reason they 
would not link until I turned it back on. Even though I wasn't using the WAN 
port. 







Kurt Fankhauser 
Wavelinc Communications 
P.O. Box 126 
Bucyrus, OH 44820 
http://www.wavelinc.com 
tel. 419-562-6405 
fax. 419-617-0110 

On Fri, Feb 13, 2015 at 9:45 PM, Jeremy < [email protected] > wrote: 



<blockquote>

I had some issues with the configuration and couldn't ever get them to pass 
traffic. Did you run into any issues that required support? 




On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway < [email protected] > wrote: 



<blockquote>



I saw that too when I was reviewing the brochure this morning. I was just 
assuming they were considering this a long range product. Kurt, do you mind 
telling me what those radios cost? 

Rory 

From: Af [mailto: [email protected] ] On Behalf Of Kurt Fankhauser 
Sent: Friday, February 13, 2015 7:36 PM 
To: [email protected] 
Subject: [AFMUG] Trango Altum AC PTP test results 





Just got done testing a Trango Altum AC PTP link on the bench. Units are 25db 
integrated panels. Did a 40mhz channel test and 80mhz via UDP. I tried a TCP 
test between two RB2011's and best I seen was 175-180'ish and that was with 
both 40 and 80mhz channels. CPU seemed to be maxing out on the 2011's. 



Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS bands but it 
doesn't :( 







Kurt Fankhauser 
Wavelinc Communications 
P.O. Box 126 
Bucyrus, OH 44820 
http://www.wavelinc.com 
tel. 419-562-6405 
fax. 419-617-0110 



</blockquote>


</blockquote>


</blockquote>


</blockquote>


</blockquote>


</blockquote>


</blockquote>


</blockquote>


Reply via email to