Not to mention the UBNT gear under load has at least that much latency...
 
 
 
John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937


-----Original Message-----
From: "Rory Conaway" <[email protected]>
Sent: Saturday, February 14, 2015 10:10am
To: "[email protected]" <[email protected]>
Subject: Re: [AFMUG] Trango Altum AC PTP test results




ADSL latencies used to be over 40ms or more.  Cable latencies are about 10ms 
from my router to the first hop so 10ms isn’t that big a deal.   I agree with 
you Mike.
 
Rory
 


From: Af [mailto:[email protected]] On Behalf Of Mike Hammett
Sent: Saturday, February 14, 2015 7:45 AM
To: [email protected]
Subject: Re: [AFMUG] Trango Altum AC PTP test results
 

A lot of WISPs get hardons over low latencies, but as long as end-to-end is 
under 100 ms or so, it doesn't really matter.



 -----
 Mike Hammett
 Intelligent Computing Solutions
[ http://www.ics-il.com ]( http://www.ics-il.com )
 


From: "Ken Hohhof" <[ [email protected] ]( mailto:[email protected] )>
To: [ [email protected] ]( mailto:[email protected] )
Sent: Saturday, February 14, 2015 8:39:27 AM
Subject: Re: [AFMUG] Trango Altum AC PTP test results



I wonder if WISPs are going to be part of a trend toward higher latencies.

 

It used to be customers mainly did web browsing and really noticed whether the 
websites snapped up immediately or lagged.  Now everyone is streaming, 
streaming, streaming.  And websites are more worried about tracking cookies and 
on-the-fly ad auctions for your eyeballs than responsiveness.  Plus people use 
mobile devices and are accustomed to the higher last mile latency of 3G and LTE.

 

Still it’s a little disappointing to backslide on latency because customers 
don’t value quick response like they used to.  They just want mass quantities 
of data to watch video, as cheap as possible.

 

I guess gamers still care about ping times.

 



 


From: [  Erich Kaiser ]( mailto:[email protected] ) 

Sent: Saturday, February 14, 2015 7:44 AM

To: [ [email protected] ]( mailto:[email protected] ) 

Subject: Re: [AFMUG] Trango Altum AC PTP test results

 


I would assume AF5x is going to be the same issue if you are using GPS? 


 



Erich Kaiser 

North Central Tower Consulting

[ [email protected] ]( mailto:[email protected] )

Office: 630-621-4804

Cell: 630-777-9291

 

On Fri, Feb 13, 2015 at 10:23 PM, Kurt Fankhauser <[ [email protected] ]( 
mailto:[email protected] )> wrote:

I can't afford 8-12ms of latency 7 hops out... Time for some Full Duplex links 
I suppose....


 




 

Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
[ http://www.wavelinc.com ]( http://www.wavelinc.com/ )
tel. [ 419-562-6405 ]( tel:419-562-6405 )
fax. [ 419-617-0110 ]( tel:419-617-0110 )

 

On Fri, Feb 13, 2015 at 10:43 PM, Erich Kaiser <[ [email protected] 
]( mailto:[email protected] )> wrote:

The Mimosa seems awesome so far (Except for lack of SNMP support, which is 
coming in April).  If you have GPS sync it seems to run between 8ms-12ms. 

 



Erich Kaiser 

North Central Tower Consulting

[ [email protected] ]( mailto:[email protected] )

Office: [ 630-621-4804 ]( tel:630-621-4804 )

Cell: [ 630-777-9291 ]( tel:630-777-9291 )
 

On Fri, Feb 13, 2015 at 9:29 PM, Kurt Fankhauser <[ [email protected] ]( 
mailto:[email protected] )> wrote:

I was hoping to replace a Ligowave link I have that's running on 40mhz. I don't 
feel like burning up a whole 80mhz of spectrum through, so I think I'll be 
buying a PTP-650 especially since I need DFS freq's.


 




 

Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
[ http://www.wavelinc.com ]( http://www.wavelinc.com/ )
tel. [ 419-562-6405 ]( tel:419-562-6405 )
fax. [ 419-617-0110 ]( tel:419-617-0110 )



 

On Fri, Feb 13, 2015 at 10:19 PM, Jeremy <[ [email protected] ]( 
mailto:[email protected] )> wrote:

I see that they sell them on the 'Trango store' now too.  Pretty sweet.  


 

On Fri, Feb 13, 2015 at 8:17 PM, Jeremy <[ [email protected] ]( 
mailto:[email protected] )> wrote:

Yeah, that is what I was told at Animal Farm also.  It seems like doing 
something specific or something in the wrong order makes them not work.  Next 
time I guess I'll have to follow directions, LOL.




 

On Fri, Feb 13, 2015 at 8:11 PM, Kurt Fankhauser <[ [email protected] ]( 
mailto:[email protected] )> wrote:


Jeremy,

 

I ended up having to default the units and then follow the quick start guide to 
the T. There must be some bugs to work out in the firmware cause when I ordered 
them the guy told me to follow the quick start to the T.

 




 

Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
[ http://www.wavelinc.com ]( http://www.wavelinc.com/ )
tel. [ 419-562-6405 ]( tel:419-562-6405 )
fax. [ 419-617-0110 ]( tel:419-617-0110 )
 



On Fri, Feb 13, 2015 at 9:59 PM, Jeremy <[ [email protected] ]( 
mailto:[email protected] )> wrote:

I also didn't follow the guide the first time.  On subsequent attempts I did, 
but it seemed like something was wrong with them at that point.  Anyway, it's 
nice to see someone having some success.  The platform looks like it has a lot 
of potential.


 

On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <[ [email protected] ]( 
mailto:[email protected] )> wrote:




Jeremy,

 

Yes I had issues but I didn't call support. It took me almost 2 hours to get 
the two radios to see each other but I finally got them too. I wasn't following 
the PTP quick start guide like I was told to. When I initially configured the 
radios I disabled the 2nd port (called WAN) in the manual. For some reason they 
would not link until I turned it back on. Even though I wasn't using the WAN 
port.

 




 

Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
[ http://www.wavelinc.com ]( http://www.wavelinc.com/ )
tel. [ 419-562-6405 ]( tel:419-562-6405 )
fax. [ 419-617-0110 ]( tel:419-617-0110 )
 

On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <[ [email protected] ]( 
mailto:[email protected] )> wrote:



I had some issues with the configuration and couldn't ever get them to pass 
traffic.  Did you run into any issues that required support? 




 

On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway <[ [email protected] ]( 
mailto:[email protected] )> wrote:




I saw that too when I was reviewing the brochure this morning. I was just 
assuming they were considering this a long range product.  Kurt, do you mind 
telling me what those radios cost?
 
Rory
 
From: Af [mailto:[ [email protected] ]( mailto:[email protected] )] On 
Behalf Of Kurt Fankhauser
Sent: Friday, February 13, 2015 7:36 PM
To: [ [email protected] ]( mailto:[email protected] )
Subject: [AFMUG] Trango Altum AC PTP test results


 


Just got done testing a Trango Altum AC PTP link on the bench. Units are 25db 
integrated panels. Did a 40mhz channel test and 80mhz via UDP. I tried a TCP 
test between two RB2011's and best I seen was 175-180'ish and that was with 
both 40 and 80mhz channels. CPU seemed to be maxing out on the 2011's. 

 

Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS bands but it 
doesn't :(





 

Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
[ http://www.wavelinc.com ]( http://www.wavelinc.com/ )
tel. [ 419-562-6405 ]( tel:419-562-6405 )
fax. [ 419-617-0110 ]( tel:419-617-0110 )

 

 

 

 

 

 

 

 

 

 
 

Reply via email to