Depends on which chuck you mean.... Slant helps with multipath. Linear to slant rejection is only 3 dB. If your interference is dual pol linear, you have two choices: Stay linear with a different frequency and hope for the best. Or use dual slant for a 3 dB reduction of the interfering signal. Better than a poke in the eye with a sharp stick.
But if you are only running one single chain/radio and the interference is on the same frequency, orient your antenna 90 degrees to the interference and you will get 20+ dB of rejection. Irrespective of the absolute polarization. If they are +45 make yours –45 etc etc. From: Jeremy Sent: Wednesday, March 25, 2015 1:47 PM To: [email protected] Subject: Re: [AFMUG] AF5X polarization Yeah, I knew about the multipath advantages. It seemed to me that 3db of rejection would increase your CINR by 3db. Am I wrong here? Chuck? On Wed, Mar 25, 2015 at 1:44 PM, Mathew Howard <[email protected]> wrote: I'm not sure that it really gains much if anything as far as interference rejection... I've read that even though the interfering V/H signals are going to be 3db weaker, you're now going to be seeing two signals (assuming dual polarity H/V interference) at that same signal level and the two combined is essentially the same as seeing the extra 3db. Hopefully someone who actually knows can confirm whether or not that's true. if that is the case, I think dual slant is mostly only going to help with multipath issues. On Wed, Mar 25, 2015 at 2:36 PM, Jeremy <[email protected]> wrote: Well if I can gain 3db by turning 45/45 I'm all over that. On Wed, Mar 25, 2015 at 1:32 PM, Josh Luthman <[email protected]> wrote: That's what everyone keeps saying =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Mar 25, 2015 at 3:30 PM, Jeremy <[email protected]> wrote: 3db right? On Wed, Mar 25, 2015 at 12:54 PM, Josh Luthman <[email protected]> wrote: Rejection from other V/H radios. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Mar 25, 2015 at 2:53 PM, Ken Hohhof <[email protected]> wrote: Anybody know what you give up by using V/H instead of dual slant with the AF5X? If the path has clear LOS and no multipath, I can't see why it would care or even be able to tell the difference.
