3GHz and 5GHz I've only used the Cambium/Laird sectors. The patterns and
null-fill is excellent. So Matt, your new integrated AP antenna better
be good. :)
On 6/19/2015 11:25 AM, Matt Mangriotis wrote:
Absolutely you can do this Ken… the PMP 450 radio has much better
adjacent channel rejection and the “90” can be used in ABCABC fashion.
For even more bandwidth -- If you have enough frequency (and a couple
of CMMs), you could even use the “60” degree antenna in an 8-sector
deployment, using ABCDABCD. (If they’re contiguous channels, you’d be
better off with ACBDACBD, so the frequencies are spaced apart a bit).
Matt
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ken Hohhof
*Sent:* Friday, June 19, 2015 11:14 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Gtek Communications deploys PMP 450
Am I the only one who actually uses the Cambium sector antennas?
Nothing against KPP, I’m just not sure what the difference is.
Price? Availability? Or ease of swapping out the AP without touching
the sector?
I wonder in this case since it’s a 6 AP cluster, was it to use
narrower sectors? We just did a 6 AP tower and used the “90 degree”
sectors (65 degrees at 3 dB points) with ABCABC frequency reuse.
Cambium used to say this was a no-no but I think they revised this
quite awhile ago and said it was fine.
*From:*Josh Luthman <mailto:j...@imaginenetworksllc.com>
*Sent:*Friday, June 19, 2015 10:59 AM
*To:*af@afmug.com <mailto:af@afmug.com>
*Subject:*Re: [AFMUG] Gtek Communications deploys PMP 450
No mention of WB for the hardware to make that setup possible?!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jun 19, 2015 at 11:56 AM, Ray Savich
<ray.sav...@cambiumnetworks.com
<mailto:ray.sav...@cambiumnetworks.com>> wrote:
Justin Aragon shares details of his network covering South Texas
at http://bit.ly/1FrijiD .
Ray
Join the Conversation
Cambium Networks Community Forum
<http://community.cambiumnetworks.com/>
