TJ, I have 4 Mimosa B5 integrated up all connected to gig ports on RB2011 and a MTx86 (maxxwave chassis) and no problems. I was having a problem with AF24 staying at 1Gb/s but found it was the cable. Gig association are picky about cable. It is possible heat / cold / rain / humidity / something changes the characters of the cable / ends enough to cause this problem.
When all else fails put new ends on everything. I ran toughcable carrier for all mine through a Gig POE surge block (can't remember model at the moment. Sincerely, Jason Pond On Tue, Jul 28, 2015 at 10:30 PM, TJ Trout <[email protected]> wrote: > any ideas how to get a mimosa to link at full gig on a mikrotik? when I > first installed it was auto/auto and worked fine and 3 weeks later it still > says gig on both devices but won't pass much traffic, I tried setting the > mimosa on manual for 1000fdx and setting the mikrotik on manual 1000fdx but > when I charge the tik I loose connection. I unchecked the advertise 10 and > 100 and 1000hd under the mikrotik auto menu and that fixed it for a little > bit but eventually it happened again. setting to manual 100 works fine. > > I was thinking someone has an idea what to do? > > mimosa suggested to lift the ground (shield) on the cable? > > should manual 1000fdx work? i can't make it link up that way. > > any thoughts? >
