We have two Mimosa links connected to an RB2011 and RB850Gx2's, and I haven't seen any issues with any of them. I would look at the cables... GigE is picky.
On Wed, Jul 29, 2015 at 8:13 AM, Glen Waldrop <[email protected]> wrote: > I don't have any Mimosa hardware, but I do remember seeing a note about > a bug fix. There was an incompatibilty between ROS v6.28 through 6.30 and > Mimosa when using gigabit if memory serves. > > Supposedly Mimosa and Mikrotik are working the problem to determine which > side is the cause. > > > ----- Original Message ----- > *From:* Shayne Lebrun <[email protected]> > *To:* [email protected] > *Sent:* Wednesday, July 29, 2015 8:05 AM > *Subject:* Re: [AFMUG] mikrotik + mimosa gig ethernet problems > > Technically, manual settings is out of spec for gig-e, I believe. > > > > Your problem is likely cable. Gig-E is really sensitive to cable > conditions. > > > > What are your error counts like? Assuming you have mikrotiks on both > ends, what happens if you flood ping each radio from the router it’s in? > If one works, and the other doesn’t, well, that’s the Ethernet cable you > need to fix. If both work great, but router->router is poor, you have an > RF issue. > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *TJ Trout > *Sent:* Wednesday, July 29, 2015 12:30 AM > *To:* [email protected] > *Subject:* [AFMUG] mikrotik + mimosa gig ethernet problems > > > > any ideas how to get a mimosa to link at full gig on a mikrotik? when I > first installed it was auto/auto and worked fine and 3 weeks later it still > says gig on both devices but won't pass much traffic, I tried setting the > mimosa on manual for 1000fdx and setting the mikrotik on manual 1000fdx but > when I charge the tik I loose connection. I unchecked the advertise 10 and > 100 and 1000hd under the mikrotik auto menu and that fixed it for a little > bit but eventually it happened again. setting to manual 100 works fine. > > I was thinking someone has an idea what to do? > > mimosa suggested to lift the ground (shield) on the cable? > > should manual 1000fdx work? i can't make it link up that way. > > any thoughts? > >
