it's a 40 ft run of tough cable level 2 , maybe I'll try new ends On Jul 29, 2015 7:26 AM, "Mathew Howard" <[email protected]> wrote:
> We have two Mimosa links connected to an RB2011 and RB850Gx2's, and I > haven't seen any issues with any of them. I would look at the cables... > GigE is picky. > > On Wed, Jul 29, 2015 at 8:13 AM, Glen Waldrop <[email protected]> > wrote: > >> I don't have any Mimosa hardware, but I do remember seeing a note about >> a bug fix. There was an incompatibilty between ROS v6.28 through 6.30 and >> Mimosa when using gigabit if memory serves. >> >> Supposedly Mimosa and Mikrotik are working the problem to determine which >> side is the cause. >> >> >> ----- Original Message ----- >> *From:* Shayne Lebrun <[email protected]> >> *To:* [email protected] >> *Sent:* Wednesday, July 29, 2015 8:05 AM >> *Subject:* Re: [AFMUG] mikrotik + mimosa gig ethernet problems >> >> Technically, manual settings is out of spec for gig-e, I believe. >> >> >> >> Your problem is likely cable. Gig-E is really sensitive to cable >> conditions. >> >> >> >> What are your error counts like? Assuming you have mikrotiks on both >> ends, what happens if you flood ping each radio from the router it’s in? >> If one works, and the other doesn’t, well, that’s the Ethernet cable you >> need to fix. If both work great, but router->router is poor, you have an >> RF issue. >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *TJ Trout >> *Sent:* Wednesday, July 29, 2015 12:30 AM >> *To:* [email protected] >> *Subject:* [AFMUG] mikrotik + mimosa gig ethernet problems >> >> >> >> any ideas how to get a mimosa to link at full gig on a mikrotik? when I >> first installed it was auto/auto and worked fine and 3 weeks later it still >> says gig on both devices but won't pass much traffic, I tried setting the >> mimosa on manual for 1000fdx and setting the mikrotik on manual 1000fdx but >> when I charge the tik I loose connection. I unchecked the advertise 10 and >> 100 and 1000hd under the mikrotik auto menu and that fixed it for a little >> bit but eventually it happened again. setting to manual 100 works fine. >> >> I was thinking someone has an idea what to do? >> >> mimosa suggested to lift the ground (shield) on the cable? >> >> should manual 1000fdx work? i can't make it link up that way. >> >> any thoughts? >> >> >
