I don't have any Mimosa hardware, but I do remember seeing a note about a bug fix. There was an incompatibilty between ROS v6.28 through 6.30 and Mimosa when using gigabit if memory serves.
Supposedly Mimosa and Mikrotik are working the problem to determine which side is the cause. ----- Original Message ----- From: Shayne Lebrun To: [email protected] Sent: Wednesday, July 29, 2015 8:05 AM Subject: Re: [AFMUG] mikrotik + mimosa gig ethernet problems Technically, manual settings is out of spec for gig-e, I believe. Your problem is likely cable. Gig-E is really sensitive to cable conditions. What are your error counts like? Assuming you have mikrotiks on both ends, what happens if you flood ping each radio from the router it’s in? If one works, and the other doesn’t, well, that’s the Ethernet cable you need to fix. If both work great, but router->router is poor, you have an RF issue. From: Af [mailto:[email protected]] On Behalf Of TJ Trout Sent: Wednesday, July 29, 2015 12:30 AM To: [email protected] Subject: [AFMUG] mikrotik + mimosa gig ethernet problems any ideas how to get a mimosa to link at full gig on a mikrotik? when I first installed it was auto/auto and worked fine and 3 weeks later it still says gig on both devices but won't pass much traffic, I tried setting the mimosa on manual for 1000fdx and setting the mikrotik on manual 1000fdx but when I charge the tik I loose connection. I unchecked the advertise 10 and 100 and 1000hd under the mikrotik auto menu and that fixed it for a little bit but eventually it happened again. setting to manual 100 works fine. I was thinking someone has an idea what to do? mimosa suggested to lift the ground (shield) on the cable? should manual 1000fdx work? i can't make it link up that way. any thoughts?
