For an bad ethernet jack, just take it apart and find a new jack using the part number and buy a $70 smd rework station and flow a new one on in 5 minutes or less?
On Thu, Aug 13, 2015 at 4:05 PM, Josh Luthman <[email protected]> wrote: > Buying Af24 will pay $100 even if it doesn't work!!! > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Aug 13, 2015 6:41 PM, "George Skorup" <[email protected]> wrote: > >> Nope, gotta send one to get one. >> >> On 8/13/2015 5:37 PM, Josh Luthman wrote: >> >> O.o can I buy refurbs without a new one? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Aug 13, 2015 6:36 PM, "Ben Moore" < <[email protected]> >> [email protected]> wrote: >> >>> No, it is flat fee. Some may not be able to be repaired (lighting, >>> etc...). I believe cost is $400, but you can confirm with support. There >>> may be others out there that will do for less (for smaller repairs), so you >>> could definitely look around. >>> >>> Thanks, >>> Ben >>> >>> On Thu, Aug 13, 2015 at 4:30 PM, Nate Burke <[email protected]> wrote: >>> >>>> So is the pricing dependent on what is wrong? Like a bad RJ45 port >>>> with no other issues would be less than say the RF is Fried, or took a >>>> lightening strike? >>>> >>>> >>>> On 8/13/2015 5:26 PM, Ben Moore wrote: >>>> >>>> I would contact support to get details, but basically you are not >>>> getting back your same unit. You get a refurbished unit and then your unit >>>> is repaired and put back in refurbished stock (there may be more to it than >>>> this...but this is basics ;)). >>>> >>>> On Thu, Aug 13, 2015 at 4:16 PM, Josh Luthman < >>>> <[email protected]>[email protected]> wrote: >>>> >>>>> So you decided to do it! Can you share the price publicly or is it a >>>>> case by case basis? >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Thu, Aug 13, 2015 at 6:08 PM, Ben Moore <[email protected]> wrote: >>>>> >>>>>> Nice Josh...We actually did more than think about it... >>>>>> >>>>>> Hi Nate - >>>>>> >>>>>> Go ahead and contact support and they will get you details on getting >>>>>> refurbished unit going. >>>>>> >>>>>> Thanks, >>>>>> Ben >>>>>> >>>>>> On Thu, Aug 13, 2015 at 4:03 PM, Josh Luthman < >>>>>> <[email protected]>[email protected]> wrote: >>>>>> >>>>>>> Ubnt thought about doing it... >>>>>>> >>>>>>> Josh Luthman >>>>>>> Office: 937-552-2340 >>>>>>> Direct: 937-552-2343 >>>>>>> 1100 Wayne St >>>>>>> Suite 1337 >>>>>>> Troy, OH 45373 >>>>>>> On Aug 13, 2015 6:01 PM, "Nate Burke" < <[email protected]> >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Anybody doing AF24 Repairs? I have an AF24 where an RJ45 didn't >>>>>>>> get crimped right and buggered up the jack on the radio. It seems >>>>>>>> like on >>>>>>>> a $1500 radio, this would be worth repairing. Anybody doing these? >>>>>>>> The >>>>>>>> radio was working fine until the bad crimp was plugged in, now it won't >>>>>>>> make good contact with the pins anymore. >>>>>>>> >>>>>>>> Nate >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> >>> >>
