If you are using Angular JS, load this lib and it is a single line of code. https://github.com/szimek/signature_pad
On Tue, Aug 25, 2015 at 9:29 AM, Simon Westlake < [email protected]> wrote: > Yeah, I saw that one a while back. Looks like a good one. I used a > different one in Powercode when I built the signature/contract stuff in > there, but I think the one you linked is a lot better now. > > > On 8/25/2015 9:19 AM, Chuck Hogg wrote: > > I rolled my own using HTML5 and SVG. Here's some source, there are > various options and different ways to do it. > https://github.com/szimek/signature_pad > > > Regards, > Chuck > > On Tue, Aug 25, 2015 at 9:16 AM, Simon Westlake < > [email protected]> wrote: > >> You roll your own digital signature capturing interface, or are you using >> Echosign or something similar? >> >> On 8/25/2015 7:51 AM, Chuck Hogg wrote: >> >> I have digital contracts setup with Platypus. Installer hands his laptop >> to the customer, they fill out the information, select rate, etc., and sign >> with the mouse on the laptop. We do everything by MAC address, so that >> information is input into their rate plan as a service, and we have >> mechanisms in place to provision speeds based on rates when the SM >> authenticates to the tower. >> >> Regards, >> Chuck >> >> On Mon, Aug 24, 2015 at 11:30 PM, Brett A Mansfield < >> [email protected]> wrote: >> >>> I'm with ya. I'll sign up for that. >>> >>> Thank you, >>> Brett A Mansfield >>> >>> On Aug 24, 2015, at 7:21 PM, Sterling Jacobson <[email protected]> >>> wrote: >>> >>> Ok, I’m going to tell you all what I want to program. >>> >>> >>> >>> I’ve been wanting to do this for a long time now, and I hope to start it >>> this year (with Platypus integration). >>> >>> >>> >>> I want a simple web site AND an app that pretty much does the same thing. >>> >>> >>> >>> The interested customers goes to web site and downloads the app or >>> creates an account online (preferably logging in with Faceboog/Google etc >>> button). >>> >>> >>> >>> That starts the ‘step’ process. >>> >>> >>> >>> The App/site pretty much takes over from there. >>> >>> >>> >>> They input their information, the app tells them what’s available. >>> >>> They chose what they want and digitally ‘sign’ the agreement. >>> >>> That kicks off the App/site to notify them that install is pending. >>> >>> The crew, using the SAME App/Site in ‘installer’ mode gets notification >>> that there is a pending install. >>> >>> They have put in their availability, so one of them can accept the task >>> and is now responsible for completing it on time. >>> >>> If this step involves the customer then they will have already put their >>> availability on the App/site and the customer will chose from an available >>> time. >>> >>> In my case there are several pre-steps for installing fiber with two or >>> three different crews, so this gets passed around the members or crew >>> chiefs by the App/site until it’s complete. >>> >>> The customer get’s notified by the site/email and/or App during the >>> various stages. >>> >>> During installation, the installer can ask the customer to finalize by >>> going to the App/site and paying etc. etc. >>> >>> Then it turns on the internet, the installer leaves and the App/site >>> goes into Support mode. >>> >>> Now if the customer has an issue they can report it through the site/app >>> via phone or tablet if their internet isn’t working. >>> >>> Again from a pool of available tech support people, it can be accepted >>> and acted upon. >>> >>> Also if there is a network wide problem affecting several, the App/site >>> can alert with ETA. >>> >>> >>> >>> All of this technology is basically SQL database stuff with some middle >>> software to tend to events. >>> >>> Nothing hugely complicated, and can integrate with Platypus or another >>> CMS/Billing at the database level easily. >>> >>> >>> >>> Once developed, should be highly adaptable for all of us. >>> >>> And basically reduce staff required to track all of this crap to >>> virtually none. >>> >>> >>> >>> Who’s with me?? >>> >>> >>> >>> *From:* Af [mailto:[email protected] <[email protected]>] *On >>> Behalf Of *Ty Featherling >>> *Sent:* Monday, August 24, 2015 3:54 PM >>> *To:* <[email protected]>[email protected] >>> *Subject:* [AFMUG] Platypus + paperless >>> >>> >>> >>> We are trying hard to reduce/eliminate all of the data entry of entering >>> new customers after installation. Currently they fill out a paper contract >>> form, collect payment for the installation, and turn that in at the office. >>> We then process them individually using the customer wizard to create a new >>> customer in Plat and then manually fill in all of the data, create invoice >>> for installation, and set their billing rates. We would much rather have >>> the installer fill all of that same data from the contract out in digital >>> format that can then be imported somehow into platypus to do almost all, if >>> not all of the customer creation steps. As we grow faster and faster the >>> paperwork is getting to be a serious load. >>> >>> >>> >>> Has anyone else solved this problem with Platypus? If not does anyonw >>> know of an avenue I might look into? We hope to turn this solution into a >>> way for the customer to sign their contract digitally but that is secondary >>> to the main task. >>> >>> >>> >>> -Ty >>> >>> >> >> > >
