Is there an issue with 13.3 SMs on 12.2.2 APs? We are testing the 450d and it looks like it is connecting but really isn't.
Any chance this is a polarity issue? All of our dished SMs are connecting fine. I seem to remember an issue with some 450APs having H and V swapped internally. LUID: 037 - [0a-00-3e-xx-xx-xx] <http://10.13.39.140:1080/?mac_esn=0a003eb29e8a> State: IN SESSION (Encrypt Disabled) Site Name: NAME PMP 450 MIMO OFDM Software Version: CANOPY 13.3 FPGA Version: 112414 (DES, Sched, US/ETSI) P11 Session Timeout: 0, AirDelay: 2950 ns, 29 bits (approximately 0.274 miles (1449 feet)) Session Count: 4, Reg Count: 4, Re-Reg Count: 0, Session Uptime: 24 d, 21:26:07 Power Level : -54.2 dBm Signal Strength Ratio : 7.0 dB V - H dB Signal to Noise Ratio: 14 dB V / 0 dB H Sustained Uplink Data Rate (AP): 65000 (kbps) Uplink Burst Allocation (AP): 2500000 (kbit) Sustained Downlink Data Rate (AP): 65000 (kbps) Downlink Burst Allocation (AP): 2500000 (kbit) Broadcast/Multicast Allocation (AP): 50000 (kbit) Max Burst Uplink Rate (D): 0 (kbit) Max Burst Downlink Rate (AP): 0 (kbit) Low Priority Uplink CIR (D): 0 (kbps) Low Priority Downlink CIR (D)
