They changed some of the frame timing around build 13.x so anything earlier is pretty squirrelly or just won't work.
Upgrade the AP to 13.2.1 On Tuesday, October 6, 2015, Carl Peterson <[email protected]> wrote: > Is there an issue with 13.3 SMs on 12.2.2 APs? We are testing the 450d > and it looks like it is connecting but really isn't. > > Any chance this is a polarity issue? All of our dished SMs are connecting > fine. I seem to remember an issue with some 450APs having H and V swapped > internally. > > LUID: 037 - [0a-00-3e-xx-xx-xx] > <http://10.13.39.140:1080/?mac_esn=0a003eb29e8a> State: IN SESSION > (Encrypt Disabled) > Site Name: NAME > PMP 450 MIMO OFDM > Software Version: CANOPY 13.3 > FPGA Version: 112414 (DES, Sched, US/ETSI) P11 > Session Timeout: 0, AirDelay: 2950 ns, 29 bits (approximately 0.274 > miles (1449 feet)) > Session Count: 4, Reg Count: 4, Re-Reg Count: 0, Session Uptime: 24 > d, 21:26:07 > Power Level : -54.2 dBm Signal Strength Ratio : 7.0 dB V - H dB > Signal to Noise Ratio: 14 dB V / 0 dB H > Sustained Uplink Data Rate (AP): 65000 (kbps) > Uplink Burst Allocation (AP): 2500000 (kbit) > Sustained Downlink Data Rate (AP): 65000 (kbps) > Downlink Burst Allocation (AP): 2500000 (kbit) > Broadcast/Multicast Allocation (AP): 50000 (kbit) > Max Burst Uplink Rate (D): 0 (kbit) > Max Burst Downlink Rate (AP): 0 (kbit) > Low Priority Uplink CIR (D): 0 (kbps) > Low Priority Downlink CIR (D) >
