I've seen significant issues with firmware mis-matching. time to update... Sent from my iPhone
> On Oct 6, 2015, at 11:41 AM, Carl Peterson <[email protected]> wrote: > > Is there an issue with 13.3 SMs on 12.2.2 APs? We are testing the 450d and > it looks like it is connecting but really isn't. > > Any chance this is a polarity issue? All of our dished SMs are connecting > fine. I seem to remember an issue with some 450APs having H and V swapped > internally. > > LUID: 037 - [0a-00-3e-xx-xx-xx] State: IN SESSION (Encrypt Disabled) > Site Name: NAME > PMP 450 MIMO OFDM > Software Version: CANOPY 13.3 > FPGA Version: 112414 (DES, Sched, US/ETSI) P11 > Session Timeout: 0, AirDelay: 2950 ns, 29 bits (approximately 0.274 > miles (1449 feet)) > Session Count: 4, Reg Count: 4, Re-Reg Count: 0, Session Uptime: 24 d, > 21:26:07 > Power Level : -54.2 dBm Signal Strength Ratio : 7.0 dB V - H dB > Signal to Noise Ratio: 14 dB V / 0 dB H > Sustained Uplink Data Rate (AP): 65000 (kbps) > Uplink Burst Allocation (AP): 2500000 (kbit) > Sustained Downlink Data Rate (AP): 65000 (kbps) > Downlink Burst Allocation (AP): 2500000 (kbit) > Broadcast/Multicast Allocation (AP): 50000 (kbit) > Max Burst Uplink Rate (D): 0 (kbit) > Max Burst Downlink Rate (AP): 0 (kbit) > Low Priority Uplink CIR (D): 0 (kbps) > Low Priority Downlink CIR (D)
