Standard SFP handles the bandwidth, no SFP+ yet ;) From: Af <[email protected]<mailto:[email protected]>> on behalf of Paul McCall <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, October 21, 2015 at 10:51 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] B11 copper v fiber
10Gbit fiber SFPs I would assume ? From: Af [mailto:[email protected]] On Behalf Of Jaime Fink Sent: Wednesday, October 21, 2015 1:49 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] B11 copper v fiber [cid:[email protected]] From: Af <[email protected]<mailto:[email protected]>> on behalf of Josh Luthman <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, October 21, 2015 at 10:37 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] B11 copper v fiber Gigabit is a lot easier at fiber than copper. At least in my experience. I think you'd be a fool to do copper when you can easily do fiber. Thank for you doing SFP by the way, Mimosa!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 21, 2015 at 1:35 PM, Scott Vander Dussen <[email protected]<mailto:[email protected]>> wrote: Mimosa recommends these SFP modules: AFBR-5710APZ<http://www.mouser.com/ProductDetail/Avago-Technologies/AFBR-5710APZ/?qs=%2fha2pyFaduhaC58MVLqFl44%252bx6hS5cz1YhojZqdUVyI7Wp%252bPDPG4Rg%3d%3d> 1.25 GBd MMF Transceiver for Gigabit Ethernet, SFP, Bail de-latch, Ext Temp (-40 to 85C) AFCT-5715ALZ<http://www.mouser.com/ProductDetail/Avago-Technologies/AFCT-5715ALZ/?qs=%2fha2pyFadujhJvt9bnk9ES81EX7WBD7ZrbBItK6kCZLHNEN0X0r%2fGA%3d%3d> 1.25 GBd SMF Transceiver with DMI for Gigabit Ethernet, SFP, Std de-latch, Ext Temp (-40 to 85C) FTLF8519P3BTL<http://www.mouser.com/ProductDetail/Finisar/FTLF8519P3BTL/?qs=%2fha2pyFaduh7nd4n5kIrSHIvC1uJRiq8EwAcMil5upKcc76M2JIwDQ%3d%3d> Fiber Optic Transmitters, Receivers, Transceivers GigE 1x/2x FC, 2.129 Gb/s trnscvr, 550m FTLF1318P3BTL<http://www.mouser.com/ProductDetail/Finisar/FTLF1318P3BTL/?qs=%2fha2pyFaduikXVilIKTQvJhiq4n%2fsUYWQAU7K0qEJnA1f%252bqIw1quUw%3d%3d> Fiber Optic Transmitters, Receivers, Transceivers 1310nmFP GigE 1x FC 1.25Gb/s trnscvr10km Assuming cable length and EMI are not issues, is there any benefit to using fiber over copper? `S
