Yes. 1200 - 1500 aggregate.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "TJ Trout" <[email protected]> To: [email protected] Sent: Wednesday, October 21, 2015 2:00:16 PM Subject: Re: [AFMUG] B11 copper v fiber Jamie; Is the b11 based on 802.11 silicone? Is the b11 capable of 750fd or 1500fd? Thank you On Wed, Oct 21, 2015 at 11:29 AM, Rory Conaway < [email protected] > wrote: And Mike quits sending you nasty emails because you think copper was sent to us by an evil entity from another dimension. Rory From: Af [mailto: [email protected] ] On Behalf Of Adam Moffett Sent: Wednesday, October 21, 2015 11:27 AM To: [email protected] Subject: Re: [AFMUG] B11 copper v fiber Two reasons: 1) Peace of mind regarding future EMI problems 2) It's pretty sexy these days to tell people you have fiber to the antenna, On 10/21/2015 1:35 PM, Scott Vander Dussen wrote: <blockquote> Mimosa recommends these SFP modules: AFBR-5710APZ � 1.25 GBd MMF Transceiver for Gigabit Ethernet, SFP, Bail de-latch, Ext Temp (-40 to 85C) AFCT-5715ALZ 1.25 GBd SMF Transceiver with DMI for Gigabit Ethernet, SFP, Std de-latch, Ext Temp (-40 to 85C) FTLF8519P3BTL Fiber Optic Transmitters, Receivers, Transceivers GigE 1x/2x FC, 2.129 Gb/s trnscvr, 550m FTLF1318P3BTL Fiber Optic Transmitters, Receivers, Transceivers 1310nmFP GigE 1x FC 1.25Gb/s trnscvr10km � Assuming cable length and EMI are not issues, is there any benefit to using fiber over copper? � `S </blockquote>
