Yes, 11Ghz. So that would be 80MHz total on the license?
-----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Hardy, Tim Sent: Monday, November 30, 2015 6:19 PM To: af@afmug.com Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question I seem to recall it was 11 GHz, right? If so, and you have the wideband license you should try for 80 MHz bandwidth and depending on your capacity needs, you can go XPIC or other options. ________________________________________ From: Af [af-boun...@afmug.com] on behalf of Jon Langeler [jon-ispli...@michwave.net] Sent: Monday, November 30, 2015 7:40 PM To: af@afmug.com Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question Yes, ask for dual pol 60MHz. Or you can buy the 'splitter adapter' instead of the OMT and use two 60MHz channels on same polarity. This is for 6GHz right? Jon Langeler Michwave Technologies, Inc. > On Nov 30, 2015, at 7:12 PM, Sterling Jacobson <sterl...@avative.net> wrote: > > Question about this Ceragon IP20 I have. > > If I want the full 1Gbps out of it, according to these charts, I should use > two 30MHz channels per polarity, right? > That would be for the 2+0 DP (2 x 500Mbps) Ceragon configuration. > > And when I go to license it, I ask the coordinator to allocate a 60MHz dual > polarity channel license? > > Or how exactly does this work? > > Thanks for your help peoples! > > [cid:image003.png@01CEF1AE.8F52B9D0] > [cid:image004.png@01CEF1AE.8F52B9D0]
