+1
Erich Kaiser North Central Tower er...@northcentraltower.com Office: 630-621-4804 Cell: 630-777-9291 On Mon, Nov 30, 2015 at 10:18 PM, Mike Hammett <af...@ics-il.net> wrote: > This whole conversation is moot until you ask your coordinator what's > available. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > ------------------------------ > *From: *"Sterling Jacobson" <sterl...@avative.net> > *To: *af@afmug.com > *Sent: *Monday, November 30, 2015 9:06:35 PM > *Subject: *Re: [AFMUG] Ceragon IP20 1Gbps License Question > > I'm pretty sure I don't have 160MHz available. > > Maybe 120MHz if I'm lucky. > > Maybe I just install and license for 500Mbps operation at 30MHz x 2 > channels (60MHz?) and work on obtaining the licensing rights to 'upgrade' > it to full 1Gbps/ 40MHz x2 x2 channels 2+0 DP? > > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of SmarterBroadband > Sent: Monday, November 30, 2015 6:52 PM > To: af@afmug.com > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > 2 x 80 > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sterling Jacobson > Sent: Monday, November 30, 2015 5:44 PM > To: af@afmug.com > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > Yes, 11Ghz. > > So that would be 80MHz total on the license? > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Hardy, Tim > Sent: Monday, November 30, 2015 6:19 PM > To: af@afmug.com > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > I seem to recall it was 11 GHz, right? If so, and you have the wideband > license you should try for 80 MHz bandwidth and depending on your capacity > needs, you can go XPIC or other options. > ________________________________________ > From: Af [af-boun...@afmug.com] on behalf of Jon Langeler [ > jon-ispli...@michwave.net] > Sent: Monday, November 30, 2015 7:40 PM > To: af@afmug.com > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > Yes, ask for dual pol 60MHz. Or you can buy the 'splitter adapter' instead > of the OMT and use two 60MHz channels on same polarity. This is for 6GHz > right? > > Jon Langeler > Michwave Technologies, Inc. > > > On Nov 30, 2015, at 7:12 PM, Sterling Jacobson <sterl...@avative.net> > wrote: > > > > Question about this Ceragon IP20 I have. > > > > If I want the full 1Gbps out of it, according to these charts, I > > should > use two 30MHz channels per polarity, right? > > That would be for the 2+0 DP (2 x 500Mbps) Ceragon configuration. > > > > And when I go to license it, I ask the coordinator to allocate a 60MHz > dual polarity channel license? > > > > Or how exactly does this work? > > > > Thanks for your help peoples! > > > > [cid:image003.png@01CEF1AE.8F52B9D0] > > [cid:image004.png@01CEF1AE.8F52B9D0] > > >
