Yes two 60MHz channels gets you a 1Gig. 11GHz would typically be 40 or 80MHz in a single polarity. 6G is 30 or 60MHz. Also see if two horizontal channels are available. But then you also might need different 'ODU' too.
Jon Langeler Michwave Technologies, Inc. > On Nov 30, 2015, at 10:08 PM, Sterling Jacobson <[email protected]> wrote: > > This is a single antenna configuration, so I think by 2+0 DP they mean XPIC? > > That would mean maybe 60MHz each polarity would get me 1Gbps? > Is that a license in 11GHz, 60MHz wide channels? Or does that mean two 30MHz > channels each way, then the same on the opposite polarity? > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Hardy, Tim > Sent: Monday, November 30, 2015 7:03 PM > To: [email protected] > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > 80 MHz will get you 700 Mbps each way with one carrier, double that with 2 or > XPIC which the dual core C model would allow. I think you mentioned > frequency congestion and that certainly would make XPIC or a 2nd pair that > much more difficult to get. > ________________________________________ > From: Af [[email protected]] on behalf of Sterling Jacobson > [[email protected]] > Sent: Monday, November 30, 2015 8:44 PM > To: [email protected] > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > Yes, 11Ghz. > > So that would be 80MHz total on the license? > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Hardy, Tim > Sent: Monday, November 30, 2015 6:19 PM > To: [email protected] > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > I seem to recall it was 11 GHz, right? If so, and you have the wideband > license you should try for 80 MHz bandwidth and depending on your capacity > needs, you can go XPIC or other options. > ________________________________________ > From: Af [[email protected]] on behalf of Jon Langeler > [[email protected]] > Sent: Monday, November 30, 2015 7:40 PM > To: [email protected] > Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question > > Yes, ask for dual pol 60MHz. Or you can buy the 'splitter adapter' instead of > the OMT and use two 60MHz channels on same polarity. This is for 6GHz right? > > Jon Langeler > Michwave Technologies, Inc. > >> On Nov 30, 2015, at 7:12 PM, Sterling Jacobson <[email protected]> wrote: >> >> Question about this Ceragon IP20 I have. >> >> If I want the full 1Gbps out of it, according to these charts, I should use >> two 30MHz channels per polarity, right? >> That would be for the 2+0 DP (2 x 500Mbps) Ceragon configuration. >> >> And when I go to license it, I ask the coordinator to allocate a 60MHz dual >> polarity channel license? >> >> Or how exactly does this work? >> >> Thanks for your help peoples! >> >> [cid:[email protected]] >> [cid:[email protected]]
