This whole conversation is moot until you ask your coordinator what's available.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ----- Original Message ----- From: "Sterling Jacobson" <[email protected]> To: [email protected] Sent: Monday, November 30, 2015 9:06:35 PM Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question I'm pretty sure I don't have 160MHz available. Maybe 120MHz if I'm lucky. Maybe I just install and license for 500Mbps operation at 30MHz x 2 channels (60MHz?) and work on obtaining the licensing rights to 'upgrade' it to full 1Gbps/ 40MHz x2 x2 channels 2+0 DP? -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of SmarterBroadband Sent: Monday, November 30, 2015 6:52 PM To: [email protected] Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question 2 x 80 -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Sterling Jacobson Sent: Monday, November 30, 2015 5:44 PM To: [email protected] Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question Yes, 11Ghz. So that would be 80MHz total on the license? -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Hardy, Tim Sent: Monday, November 30, 2015 6:19 PM To: [email protected] Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question I seem to recall it was 11 GHz, right? If so, and you have the wideband license you should try for 80 MHz bandwidth and depending on your capacity needs, you can go XPIC or other options. ________________________________________ From: Af [[email protected]] on behalf of Jon Langeler [[email protected]] Sent: Monday, November 30, 2015 7:40 PM To: [email protected] Subject: Re: [AFMUG] Ceragon IP20 1Gbps License Question Yes, ask for dual pol 60MHz. Or you can buy the 'splitter adapter' instead of the OMT and use two 60MHz channels on same polarity. This is for 6GHz right? Jon Langeler Michwave Technologies, Inc. > On Nov 30, 2015, at 7:12 PM, Sterling Jacobson <[email protected]> wrote: > > Question about this Ceragon IP20 I have. > > If I want the full 1Gbps out of it, according to these charts, I > should use two 30MHz channels per polarity, right? > That would be for the 2+0 DP (2 x 500Mbps) Ceragon configuration. > > And when I go to license it, I ask the coordinator to allocate a 60MHz dual polarity channel license? > > Or how exactly does this work? > > Thanks for your help peoples! > > [cid:[email protected]] > [cid:[email protected]]
