Iirc they're 7 watts at 24v? So like 350ma each. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 15, 2015 6:12 PM, "Christopher Gray" <[email protected]> wrote:
> The spec sheet for the RB 750P (PowerBox) says maximum power output is 1 A > on a port (Maximum total of 2 A). The ePMP shouldn't draw more than 0.5 A, > so things are looking good. > > Thank you. I'll pick one up and try it out. > > > On Tue, Dec 15, 2015 at 2:31 PM, Josh Luthman <[email protected] > > wrote: > >> My main site is 8x ePMP 24v with SynInjectors. I'm doing 24v but the >> distance from the SyncInjector to radio is tops 60 feet of cat5. >> >> 20v is when they won't boot. >> >> If your runs are 100-200 feet I doubt you'll lose 3.5 volts. I'm not >> sure what kind of amperage capacity the 750p has, though. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Dec 15, 2015 at 2:28 PM, Christopher Gray < >> [email protected]> wrote: >> >>> The spec sheet shows ePMP sync radios accept supplies as low as 23V. >>> >>> I am currently running 24V systems with ePMP non-sync radios. Does >>> anyone run 24V systems with ePMP sync radios? My Mikrotik 750UP and 750P >>> outputs measure only 23.5V, so I'd expect very little room for losses. >>> >>> I want to try some, but I don't want to change my power configuration >>> just yet if I don't have to. >>> >>> Thanks - Chris >>> >> >> >
