I don't think you can disable transparent bridging on the AC radios... but we have OSPF working fine over several links. Are you running them PTP or PTMP mode?
On Tue, Dec 22, 2015 at 5:08 PM, Tim Reichhart < [email protected]> wrote: > Where is this at because I have 7.1.4xc firmware on both of them. > > Tim > > ------------------------------ > -----Original Message----- > From: "Bill Prince" <[email protected]> > To: [email protected] > Date: 12/22/15 06:06 PM > Subject: Re: [AFMUG] ospf not passing on PBE-AC-500 > > On the newer firmware, it's a checkbox labeled "transparent bridging". > Required for OSPF. > > bp > <part15sbs{at}gmail{dot}com> > > On 12/22/2015 3:04 PM, Josh Luthman wrote: > > > Make sure WDS is enabled on both sides? > > > > Josh Luthman > Office: 937-552-2340937-552-2340 > Direct: 937-552-2343937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Dec 22, 2015 at 6:02 PM, Cassidy B. Larson < <[email protected]> > [email protected]> wrote: > >> Are you filtering multicast? >> >> >> >> > On Dec 22, 2015, at 4:01 PM, Tim Reichhart < >> <[email protected]>[email protected]> wrote: >> > >> > guys my ospf network is not passing traffic after replacing the links >> from powerbeam m5 400 to pbe-ac-500 I have the latest version of firmware >> on the 500 ac. What can I do get it back up? I am using miktroik routers. >> > >> > >> > >> > >> > >> >> >> > > > > > > Call > Send SMS > Call from mobile > Add to Skype > You'll need Skype CreditFree via Skype >
