Mathew I am running PTP.
-----Original Message----- From: "Mathew Howard" <[email protected]> To: af <[email protected]> Date: 12/22/15 06:09 PM Subject: Re: [AFMUG] ospf not passing on PBE-AC-500 I don't think you can disable transparent bridging on the AC radios... but we have OSPF working fine over several links. Are you running them PTP or PTMP mode? On Tue, Dec 22, 2015 at 5:08 PM, Tim Reichhart <[email protected]> wrote: Where is this at because I have 7.1.4xc firmware on both of them. Tim -----Original Message----- From: "Bill Prince" <[email protected]> To: [email protected] Date: 12/22/15 06:06 PM Subject: Re: [AFMUG] ospf not passing on PBE-AC-500 On the newer firmware, it's a checkbox labeled "transparent bridging". Required for OSPF. bp <part15sbs{at}gmail{dot}com> On 12/22/2015 3:04 PM, Josh Luthman wrote: Make sure WDS is enabled on both sides? Josh Luthman Office: 937-552-2340937-552-2340 Direct: 937-552-2343937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Dec 22, 2015 at 6:02 PM, Cassidy B. Larson <[email protected]> wrote: Are you filtering multicast? > On Dec 22, 2015, at 4:01 PM, Tim Reichhart <[email protected]> > wrote: > > guys my ospf network is not passing traffic after replacing the links from > powerbeam m5 400 to pbe-ac-500 I have the latest version of firmware on the > 500 ac. What can I do get it back up? I am using miktroik routers. > > > > > Call Send SMS Call from mobile Add to Skype You'll need Skype CreditFree via Skype
