Running 5.7 software ver 14.1.1 From: Af [mailto:[email protected]] On Behalf Of George Skorup Sent: Monday, February 1, 2016 4:42 PM To: [email protected] Subject: Re: [AFMUG] pmp450
There still seems to be some misconception on this. 8X/1X means that it's 8X capable / 1X current. It's always going to show 8X capable (or 2X for FSK, 3X for 430). After the / is what you need to pay attention to. Also, the uplink and downlink are independent. On the AP session status page (power tab), that's the downlink rate to that SM. On the SM main page, link status, etc., that's the uplink rate to the AP. What band is this? 2.4, 3.6, 5.4 or 5.7? And what software version do you have on the radios? It'd be best to stick with 13.2.1 for now. For the longest time I too thought this was backwards. I assure you it's correct. On 2/1/2016 2:26 PM, Ryan Mano wrote: 8x down 1x up this is the first sm am trying to install on it the freq am on is very clean not sure what the problem is....unless am missing a setting? ________________________________ From: Af <[email protected]><mailto:[email protected]> on behalf of Josh Luthman <[email protected]><mailto:[email protected]> Sent: Monday, February 1, 2016 3:17 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] pmp450 Signals on each side? 8x down 1x up? Could be an uplink path issue or heavy interference at the AP side. Have you changed frequencies? Spectrum analysis? Is this the first SM on the AP? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Feb 1, 2016 at 3:16 PM, Ryan Mano <[email protected]<mailto:[email protected]>> wrote: am new to the pmp450 looks straight forward but am having issues registering it from a distance when I point the sm which is 12 feet in front of the ap it syncs 8x by 1x ...but if I go 1mile down the road it doesn't register at all not sure what am doing wrong...has anyone had this similar issue like this? thanks
