Buy a set of those DSL thingamajigs. Unless you're trying to run PoE to
power a remote device. Then you're screwed. Ethernet does not work
beyond 100 meters. If it does, it won't be reliable.
On 2/8/2016 3:22 PM, Chris Wright wrote:
I like TJ’s suggestion, but if you wanted a shotgun approach, you
could try breaking up the twisted pairs and give yourself two 4-wire
ends on each side that’ll hopefully still handle 10mbps, then bond
them. BAM! 20mbps. It’s so terrible it just might work.
Chris Wright
Network Administrator
Velociter Wireless
209-838-1221 x115
*From:*Af [mailto:[email protected]] *On Behalf Of *TJ Trout
*Sent:* Monday, February 08, 2016 12:52 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] 500 Foot Cat-5 Run
do you have conduit? pull better cable, like TCL2 should work at 100M
no problem, if not use vdsl ethernet extenders
On Mon, Feb 8, 2016 at 12:48 PM, Mathew Howard <[email protected]
<mailto:[email protected]>> wrote:
dig it up halfway and plug in a PoE powered switch :P
On Mon, Feb 8, 2016 at 2:39 PM, Josh Reynolds <[email protected]
<mailto:[email protected]>> wrote:
Run fiber? :) You're only about 172ft past ethernet spec :P
On Mon, Feb 8, 2016 at 2:38 PM, Matt <[email protected]
<mailto:[email protected]>> wrote:
> I have a ~500 foot buried cat-5 run that works fine at 10base FDX but
> not 100base. Anyone know of a way to get it to run 100base? I need
> about 20mbps out of this.
