https://www.neteon.net/products/compact-ethernet-extender/vc-201a.html
Will need 2 On Mon, Feb 8, 2016 at 4:22 PM, Matt <[email protected]> wrote: >> Buy a set of those DSL thingamajigs. Unless you're trying to run PoE to >> power a remote device. Then you're screwed. Ethernet does not work beyond >> 100 meters. If it does, it won't be reliable. > > That's what I was thinking. Anyone know of any that are not terribly > expensive? Hopefully under $500 for pair? If a new line needs run it > will likely have to be bored in. > > > > > >> >> On 2/8/2016 3:22 PM, Chris Wright wrote: >> >> I like TJ’s suggestion, but if you wanted a shotgun approach, you could try >> breaking up the twisted pairs and give yourself two 4-wire ends on each side >> that’ll hopefully still handle 10mbps, then bond them. BAM! 20mbps. It’s so >> terrible it just might work. >> >> >> >> Chris Wright >> >> Network Administrator >> >> Velociter Wireless >> >> 209-838-1221 x115 >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of TJ Trout >> Sent: Monday, February 08, 2016 12:52 PM >> To: [email protected] >> Subject: Re: [AFMUG] 500 Foot Cat-5 Run >> >> >> >> do you have conduit? pull better cable, like TCL2 should work at 100M no >> problem, if not use vdsl ethernet extenders >> >> >> >> On Mon, Feb 8, 2016 at 12:48 PM, Mathew Howard <[email protected]> wrote: >> >> dig it up halfway and plug in a PoE powered switch :P >> >> >> >> On Mon, Feb 8, 2016 at 2:39 PM, Josh Reynolds <[email protected]> wrote: >> >> Run fiber? :) You're only about 172ft past ethernet spec :P >> >> >> On Mon, Feb 8, 2016 at 2:38 PM, Matt <[email protected]> wrote: >>> I have a ~500 foot buried cat-5 run that works fine at 10base FDX but >>> not 100base. Anyone know of a way to get it to run 100base? I need >>> about 20mbps out of this. >> >> >> >> >> >>
