Streakwave lists a bunch of products from a company called Veracity, basically a 2 port switch powered by POE over one of the ports, would one of those work? I think some of them are weatherproof. Model numbers start with VOR. CyberData also has one.
From: George Skorup Sent: Monday, February 08, 2016 4:10 PM To: [email protected] Subject: Re: [AFMUG] 500 Foot Cat-5 Run Buy a set of those DSL thingamajigs. Unless you're trying to run PoE to power a remote device. Then you're screwed. Ethernet does not work beyond 100 meters. If it does, it won't be reliable. On 2/8/2016 3:22 PM, Chris Wright wrote: I like TJ’s suggestion, but if you wanted a shotgun approach, you could try breaking up the twisted pairs and give yourself two 4-wire ends on each side that’ll hopefully still handle 10mbps, then bond them. BAM! 20mbps. It’s so terrible it just might work. Chris Wright Network Administrator Velociter Wireless 209-838-1221 x115 From: Af [mailto:[email protected]] On Behalf Of TJ Trout Sent: Monday, February 08, 2016 12:52 PM To: [email protected] Subject: Re: [AFMUG] 500 Foot Cat-5 Run do you have conduit? pull better cable, like TCL2 should work at 100M no problem, if not use vdsl ethernet extenders On Mon, Feb 8, 2016 at 12:48 PM, Mathew Howard <[email protected]> wrote: dig it up halfway and plug in a PoE powered switch :P On Mon, Feb 8, 2016 at 2:39 PM, Josh Reynolds <[email protected]> wrote: Run fiber? :) You're only about 172ft past ethernet spec :P On Mon, Feb 8, 2016 at 2:38 PM, Matt <[email protected]> wrote: > I have a ~500 foot buried cat-5 run that works fine at 10base FDX but > not 100base. Anyone know of a way to get it to run 100base? I need > about 20mbps out of this.
