I'm thinking about our boxes now, they may not be 24x24. Probably more like 18" tall. Searching through Google drive pics... On Feb 10, 2016 6:13 PM, "Jason McKemie" <j.mcke...@veloxinetbroadband.com> wrote:
> Looks like they've gone up a LOT. > > On Wednesday, February 10, 2016, George Skorup <geo...@cbcast.com> wrote: > >> Here's what I got last year. >> >> On 2/10/2016 6:05 PM, Jason McKemie wrote: >> >> My quote had a breakdown of the different elements, it wasn't much >> difference for the base unit though. >> >> On Wednesday, February 10, 2016, Josh Reynolds <j...@kyneticwifi.com> >> wrote: >> >>> Ours were bare aluminum, no fans, nothing fancy. >>> On Feb 10, 2016 5:53 PM, "Jason McKemie" < >>> j.mcke...@veloxinetbroadband.com> wrote: >>> >>>> My quote was in that neighborhood as well. It has been a while since I >>>> checked though. >>>> >>>> On Wednesday, February 10, 2016, Josh Reynolds <j...@kyneticwifi.com> >>>> wrote: >>>> >>>>> Uh, I remember paying $400ish for one 24x19x24, with rail. 2 was >>>>> $900ish after shipping to Alaska. >>>>> >>>>> Have they really gone up that much??? >>>>> On Feb 10, 2016 5:31 PM, "George Skorup" <geo...@cbcast.com> wrote: >>>>> >>>>>> I have a quote from Bison for the 24x24" rack version with universal >>>>>> tower/pole mount brackets. Over $700. So I don't think Dennis is doing >>>>>> much >>>>>> mark-up, if any. Just wanted to point that out. >>>>>> >>>>>> On 2/10/2016 5:26 PM, Josh Reynolds wrote: >>>>>> >>>>>> I was thinking the same thing >>>>>> On Feb 10, 2016 1:43 PM, "Jason McKemie" < >>>>>> j.mcke...@veloxinetbroadband.com> wrote: >>>>>> >>>>>>> These look like bison profab enclosures... With a markup. >>>>>>> >>>>>>> On Wednesday, February 10, 2016, Dennis Burgess < >>>>>>> dmburg...@linktechs.net> wrote: >>>>>>> >>>>>>>> We use nothing but these anymore. These are maybe bigger than you >>>>>>>> asked, but most of the time we drop in a two or three rackmount units, >>>>>>>> plus >>>>>>>> some power or something on the backplate. >>>>>>>> >>>>>>>> >>>>>>>> http://www.linktechs.net/productcart/pc/viewPrd.asp?idproduct=506&idcategory=0 >>>>>>>> >>>>>>>> Also, all of our new shinny towers in the area require stainless >>>>>>>> steel, nothing that I can rust can be used on-site. :( Shippiing is >>>>>>>> basically the same on 4 vs 1 though. Very light. >>>>>>>> >>>>>>>> Dennis Burgess, CTO, Link Technologies, Inc. >>>>>>>> den...@linktechs.net – 314-735-0270 x103 <314-735-0270%20x103> – >>>>>>>> www.linktechs.net >>>>>>>> >>>>>>>> -----Original Message----- >>>>>>>> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tim Reichhart >>>>>>>> Sent: Wednesday, February 10, 2016 6:24 AM >>>>>>>> To: af@afmug.com >>>>>>>> Subject: [AFMUG] weatherproof enclosure >>>>>>>> >>>>>>>> what are you guys using for weatherproof enclosure? I am looking >>>>>>>> for one that can host an small miktroik router and 4-6 poes with cable >>>>>>>> what >>>>>>>> do you guys say to use? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>