Now you have me thinking. I recall getting another quote for the 24x16
or 24x18 or whatever it was. Maybe $450 or so. I got worried about the
shorter one not being able to get the battery capacity I wanted with all
of the other gear taking up so much room, and a secondary battery-only
enclosure was going to be more than the 24" tall enclosure, so that
wasn't going to happen either. And most places, pad mounted enclosures
with battery compartments/trays is unpossible. Not to mention those
enclosure being a couple $k. I need good nuf grade, not super-duper
telco grade. Sure, there's lots of used stuff out there at good prices.
Most of the time though, all that stuff is way, way overkill.
On 2/10/2016 6:16 PM, Josh Reynolds wrote:
I'm thinking about our boxes now, they may not be 24x24. Probably more
like 18" tall. Searching through Google drive pics...
On Feb 10, 2016 6:13 PM, "Jason McKemie"
<[email protected]
<mailto:[email protected]>> wrote:
Looks like they've gone up a LOT.
On Wednesday, February 10, 2016, George Skorup <[email protected]
<mailto:[email protected]>> wrote:
Here's what I got last year.
On 2/10/2016 6:05 PM, Jason McKemie wrote:
My quote had a breakdown of the different elements, it wasn't
much difference for the base unit though.
On Wednesday, February 10, 2016, Josh Reynolds
<[email protected]> wrote:
Ours were bare aluminum, no fans, nothing fancy.
On Feb 10, 2016 5:53 PM, "Jason McKemie"
<[email protected]> wrote:
My quote was in that neighborhood as well. It has
been a while since I checked though.
On Wednesday, February 10, 2016, Josh Reynolds
<[email protected]> wrote:
Uh, I remember paying $400ish for one 24x19x24,
with rail. 2 was $900ish after shipping to Alaska.
Have they really gone up that much???
On Feb 10, 2016 5:31 PM, "George Skorup"
<[email protected]> wrote:
I have a quote from Bison for the 24x24" rack
version with universal tower/pole mount
brackets. Over $700. So I don't think Dennis
is doing much mark-up, if any. Just wanted to
point that out.
On 2/10/2016 5:26 PM, Josh Reynolds wrote:
I was thinking the same thing
On Feb 10, 2016 1:43 PM, "Jason McKemie"
<[email protected]> wrote:
These look like bison profab
enclosures... With a markup.
On Wednesday, February 10, 2016, Dennis
Burgess <[email protected]> wrote:
We use nothing but these anymore.
These are maybe bigger than you
asked, but most of the time we drop
in a two or three rackmount units,
plus some power or something on the
backplate.
http://www.linktechs.net/productcart/pc/viewPrd.asp?idproduct=506&idcategory=0
Also, all of our new shinny towers
in the area require stainless steel,
nothing that I can rust can be used
on-site. :( Shippiing is basically
the same on 4 vs 1 though. Very light.
Dennis Burgess, CTO, Link
Technologies, Inc.
[email protected] – 314-735-0270
x103 <tel:314-735-0270%20x103> –
www.linktechs.net
<http://www.linktechs.net>
-----Original Message-----
From: Af
[mailto:[email protected]] On
Behalf Of Tim Reichhart
Sent: Wednesday, February 10, 2016
6:24 AM
To: [email protected]
Subject: [AFMUG] weatherproof enclosure
what are you guys using for
weatherproof enclosure? I am looking
for one that can host an small
miktroik router and 4-6 poes with
cable what do you guys say to use?
