Will the 450 CPE work in 5.2? Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell [email protected]
> On Feb 20, 2016, at 2:45 PM, Tushar Patel <[email protected]> wrote: > > Matt, > > To take advantage don't we need cheaper CPE? > > Tushar > > >> On Feb 20, 2016, at 12:43 PM, Matt Mangriotis >> <[email protected]> wrote: >> >> Didn’t see anyone answer you on this Sam. >> >> 5.1 GHz (UNII-1) is 100 MHz (5150-5250 MHz), and is not DFS controlled, and >> follows similar rules to 5.8 GHz. This band is available in R14.1.1. >> >> 5.2 GHz (UNII-2) is also 100 MHz (5250-5350 MHz), but is a bit less useful >> in that the max EIRP allowed is 30 dBm and it’s subject to DFS radar >> detection mechanisms. >> >> Additional info: https://en.wikipedia.org/wiki/U-NII >> >> Taking advantage of these bands, however, can prove hugely useful and >> several of our customers are getting equipment deployed and working soon. >> >> (Note: 5.2 and 5.4 will be supported in the R14.1.2 beta release that will >> be out very soon). >> >> Matt >> >> From: Af [mailto:[email protected]] On Behalf Of Sam Lambie >> Sent: Friday, February 19, 2016 4:54 PM >> To: [email protected] >> Subject: [AFMUG] 450i 5.1 and 5.2 non overlapping channels? >> >> Is there any documentation or list knowledge on how big each frequency is? >> Just wondering if it is worth it to go to the 450i and the ridiculously >> expensive SM's. >> We are running out of spectrum in 5.4 and 5.8 though. >> >> -- >> -- >> Sam Lambie >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com
