We've been putting radomes on ALL of the Force200's.

Would be nice if they could come up with a sync-over-power variant of the 200.

..... or let us order the 450d radome w/ sub-reflector element. The Force110 and 450d is the same reflector.. and feed.

Just sayin.

On 2/23/2016 8:32 PM, Josh Luthman wrote:

Why go through the effort of replacing them?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Feb 23, 2016 9:31 PM, "Brandon Yuchasz" <[email protected] <mailto:[email protected]>> wrote:

    Not exactly what you are asking but we have done a lot of 10 to 12
    mile links with the stock force 110 and got full modulation. I
    have not put up the force 200 yet but plan to start replacing all
    the force 110 links with them as soon as the weather warms a bit.
    The old 110s will become backup links.

    Best regards,

    Brandon Yuchasz

    GogebicRange.net

    www.gogebicrange.net <http://www.gogebicrange.net/>

    *From:*Af [mailto:[email protected]
    <mailto:[email protected]>] *On Behalf Of *Joseph Marsh
    *Sent:* Tuesday, February 23, 2016 5:32 PM
    *To:* [email protected] <mailto:[email protected]>
    *Subject:* Re: [AFMUG] Fw: Force 200 Ptp distance

    Thanks for the info Mathew ... I don't like more than 10 miles.
    But was curious at 20

    On Feb 23, 2016 5:28 PM, "Mathew Howard" <[email protected]
    <mailto:[email protected]>> wrote:

    Yeah - 40 miles appears to be the max for ePMP. Realistically, it
    *should* be possible to get full modulation at 8 miles with Force
    200's, but at 20 miles, you're going to want bigger dishes.

    On Tue, Feb 23, 2016 at 5:24 PM, Chuck McCown <[email protected]
    <mailto:[email protected]>> wrote:

    As a non smart-ass answer, there are probably some timing
    constraints that will limit the distance before the RF will,
    assuming LOS.

    *From:*Chuck McCown <mailto:[email protected]>

    *Sent:*Tuesday, February 23, 2016 3:47 PM

    *To:*[email protected] <mailto:[email protected]>

    *Subject:*Re: [AFMUG] Force 200 Ptp distance

    I think earth curvature will probably be the limiting factor.

    *From:*Joseph Marsh <mailto:[email protected]>

    *Sent:*Tuesday, February 23, 2016 3:45 PM

    *To:*[email protected] <mailto:[email protected]>

    *Subject:*[AFMUG] Force 200 Ptp distance

    What is the max distance for a force 200 Ptp link?


Reply via email to