Yeah, these SyncInjectors can take up to 56VDC, and it’s an Eltek with a floating ground so we’re able to put out 48vdc. Just to verify that I’m doing +48 if I put my multimeter on, red to red, and back to black I’m reading +53.98VDC which is as expected for +48, right?
From: Af [mailto:[email protected]] On Behalf Of Josh Baird Sent: Thursday, March 10, 2016 7:44 AM To: [email protected] Subject: Re: [AFMUG] FSK power problem? I'm assuming you are using a DC-DC converter to convert your -48VDC down to 24V for the SyncInjectors handling the FSK? Also, your rectifier is probably -48VDC, not 48VDC. On Thu, Mar 10, 2016 at 10:34 AM, Scott Vander Dussen <[email protected]<mailto:[email protected]>> wrote: We just changed out a 24vdc 20A AC/DC power supply with a 48vdc rectifier. This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450 and FSK APs in each of those Syncinjectors. When we powered back up 6 of the 6 FSK wont establish eth link with the Netonix, all the 450 are fine. Ideas? Tower climber en route but I'm stumped. TIA Thanks, `S --- Sent mobile, typed by thumbs.
