I believe that is a passive voltage configuration.
I have not seen where it will down convert to 24v
I know that the CTM2m from Lastmile will do this given you chose the
correct radio type for that port.
On 03/10/2016 09:55 AM, Scott Vander Dussen wrote:
image1.JPG
Thanks,
`S
---
Sent mobile, typed by thumbs.
On Mar 10, 2016, at 07:53, Josh Baird <[email protected]
<mailto:[email protected]>> wrote:
I haven't heard of this magical SyncInjector with a built in DC-DC
converter that you speak of!
On Thu, Mar 10, 2016 at 10:48 AM, Scott Vander Dussen
<[email protected] <mailto:[email protected]>> wrote:
Yes, but we're using SyncInjector version IO which allows
24-56VDC input and regulates that back down to 24VDC for the radios.
-----Original Message-----
From: Af [mailto:[email protected]
<mailto:[email protected]>] On Behalf Of Chuck McCown
Sent: Thursday, March 10, 2016 7:39 AM
To: [email protected] <mailto:[email protected]>
Subject: Re: [AFMUG] FSK power problem?
Dumb question:
You know the FSK have an absolute max input voltage of 30 VDC
with the smoke exit voltage around 36 VDC, right?
-----Original Message-----
From: Scott Vander Dussen
Sent: Thursday, March 10, 2016 8:34 AM
To: [email protected] <mailto:[email protected]>
Subject: [AFMUG] FSK power problem?
We just changed out a 24vdc 20A AC/DC power supply with a 48vdc
rectifier.
This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450
and FSK APs in each of those Syncinjectors. When we powered back
up 6 of the 6 FSK wont establish eth link with the Netonix, all
the 450 are fine. Ideas? Tower climber en route but I'm stumped. TIA
Thanks,
`S
---
Sent mobile, typed by thumbs.
