It is. See the red 'MATCH CONNECTED RADIOS' warning right below it? On Thu, Mar 10, 2016 at 10:58 AM, David <[email protected]> wrote:
> I believe that is a passive voltage configuration. > I have not seen where it will down convert to 24v > I know that the CTM2m from Lastmile will do this given you chose the > correct radio type for that port. > > > On 03/10/2016 09:55 AM, Scott Vander Dussen wrote: > > [image: image1.JPG] > > Thanks, > `S > > --- > Sent mobile, typed by thumbs. > > On Mar 10, 2016, at 07:53, Josh Baird <[email protected]> wrote: > > I haven't heard of this magical SyncInjector with a built in DC-DC > converter that you speak of! > > On Thu, Mar 10, 2016 at 10:48 AM, Scott Vander Dussen <[email protected] > > wrote: > >> Yes, but we're using SyncInjector version IO which allows 24-56VDC input >> and regulates that back down to 24VDC for the radios. >> >> -----Original Message----- >> From: Af [mailto:[email protected]] On Behalf Of Chuck McCown >> Sent: Thursday, March 10, 2016 7:39 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> Dumb question: >> You know the FSK have an absolute max input voltage of 30 VDC with the >> smoke exit voltage around 36 VDC, right? >> >> -----Original Message----- >> From: Scott Vander Dussen >> Sent: Thursday, March 10, 2016 8:34 AM >> To: [email protected] >> Subject: [AFMUG] FSK power problem? >> >> We just changed out a 24vdc 20A AC/DC power supply with a 48vdc rectifier. >> This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450 and FSK >> APs in each of those Syncinjectors.� When we powered back up 6 of the 6 >> FSK wont establish eth link with the Netonix, all the 450 are fine.� >> Ideas? Tower climber en route but I'm stumped. TIA >> >> Thanks, >> `S >> >> --- >> Sent mobile, typed by thumbs. >> >> >> >> >> > >
