Oh wow, that’s fairly misleading. So I just smoked a ring of FSK. From: Af [mailto:[email protected]] On Behalf Of Josh Baird Sent: Thursday, March 10, 2016 7:56 AM To: [email protected] Subject: Re: [AFMUG] FSK power problem?
Yeah, the SI's take up to ~60V, but they output what you feed them. If you feed them 48V, they output 48V. They do not have internal DC/DC converters unless I completely missed a new product announcement from Forrest (but, I don't see this product on the website). On Thu, Mar 10, 2016 at 10:55 AM, Scott Vander Dussen <[email protected]<mailto:[email protected]>> wrote: Thanks, `S --- Sent mobile, typed by thumbs. On Mar 10, 2016, at 07:53, Josh Baird <[email protected]<mailto:[email protected]>> wrote: I haven't heard of this magical SyncInjector with a built in DC-DC converter that you speak of! On Thu, Mar 10, 2016 at 10:48 AM, Scott Vander Dussen <[email protected]<mailto:[email protected]>> wrote: Yes, but we're using SyncInjector version IO which allows 24-56VDC input and regulates that back down to 24VDC for the radios. -----Original Message----- From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Chuck McCown Sent: Thursday, March 10, 2016 7:39 AM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] FSK power problem? Dumb question: You know the FSK have an absolute max input voltage of 30 VDC with the smoke exit voltage around 36 VDC, right? -----Original Message----- From: Scott Vander Dussen Sent: Thursday, March 10, 2016 8:34 AM To: [email protected]<mailto:[email protected]> Subject: [AFMUG] FSK power problem? We just changed out a 24vdc 20A AC/DC power supply with a 48vdc rectifier. This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450 and FSK APs in each of those Syncinjectors. When we powered back up 6 of the 6 FSK wont establish eth link with the Netonix, all the 450 are fine. Ideas? Tower climber en route but I'm stumped. TIA Thanks, `S --- Sent mobile, typed by thumbs.
