I see now, if you zoom in it's one male and one female. That's fantastic! 5A slowblo fuses have worked just fine for me.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, May 10, 2016 at 2:05 PM, George Skorup <[email protected]> wrote: > n+1 wires on one 1/4" QD post is exactly what that does. Maybe I don't > understand.... > > I would lean towards the standard of fusing between paralleled batteries > though. At least with large-ish batteries that can dump enough current from > a good string to another with a shorted cell and burn up your wiring, which > pretty much acts as a fuse itself, but still. For short #10's, I would put > a 40A fuse. I believe APC used 50 or 60A fuses with #10. That's kinda scary. > > On 5/10/2016 12:51 PM, Josh Luthman wrote: > > That's pretty neat! I need two wire one F tab though. > On May 10, 2016 1:48 PM, "George Skorup" <[email protected]> wrote: > >> These can come in handy too... >> >> >> http://www.amazon.com/Morris-Products-Disconnect-Insulated-12-10/dp/B005GDFDI0 >> >> On 5/10/2016 11:48 AM, Josh Luthman wrote: >> >> Oh awesome, thank you! I wish I had saved one of these pictures. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, May 10, 2016 at 12:45 PM, Jason Wilson < >> <[email protected]>[email protected]> wrote: >> >>> I hit send too quick. This is what APC does. Here is the Power Pole >>> Connector that they use. Pretty much a standard. >>> <https://powerwerx.com/anderson-sb-connectors-sb50-50amp> >>> https://powerwerx.com/anderson-sb-connectors-sb50-50amp >>> >>> >>> >>> Jason Wilson >>> Remotely Located >>> Providing High Speed Internet to out of the way places. >>> 530-651-1736 >>> 530-748-9608 Cell >>> <http://www.remotelylocated.com>www.remotelylocated.com >>> >>> On Tue, May 10, 2016 at 9:41 AM, Jason Wilson < >>> <[email protected]>[email protected]> wrote: >>> >>>> On May 10, 2016 9:36 AM, "Josh Luthman" < <[email protected]> >>>> [email protected]> wrote: >>>> >>>>> I have 8 batteries that I want 24v to come off of. Any suggestions or >>>>> parts to get two leads on the F terminals? >>>>> >>>>> http://i.imgur.com/r3X21cw.jpg >>>>> >>>>> My only idea right now is to solder the wires together near the >>>>> terminals and then tape/wrap it. >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>> >>> >> >> >
