There was a time in history where the AP had errors on a good perfect cable until you put in a surge suppressor. Then the errors went away.
From: Ryan Mano Sent: Tuesday, May 24, 2016 12:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors brand new...i replaced the old moto ones (beige ones) -------------------------------------------------------------------------------- From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors i am using chucks surges and no there is no FM radio on them -------------------------------------------------------------------------------- From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs ------------------------------------------------------------------------------ From: Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errors….when I do….I change the duplex from 100 to 10base and it runs with no errors but the customer are not happy…sometimes I just can’t put it into 100base crc just go nuts Lets here your battles with crc’s