>From the outside world to the LAN IP nothing. From my house (the same /23 of publics) it does ping.
>From the wired side of the epmp radio I could not ping the RF interface IP. Or anything farther away. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jun 22, 2016 at 12:33 AM, George Skorup <[email protected]> wrote: > What about a traceroute from upstream to the SM LAN? Does it just die? > > On 6/21/2016 11:27 PM, Josh Luthman wrote: > > Static route from our router to the ePMP RF IP. RF IP is DHCP, tried > static. > > Can't see the routing table on the SM....augh..... > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Jun 22, 2016 at 12:22 AM, George Skorup <[email protected]> wrote: > >> How are you assigning it an IP on the wireless/WAN side? Maybe a default >> route thing? And then an upstream route back to the LAN side of the SM? >> >> On 6/21/2016 11:17 PM, Josh Luthman wrote: >> >> NAT works on like 98% of our customers. Bridge works on the other 2%. >> Router mode didn't seem to do it's job. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Jun 22, 2016 at 12:13 AM, George Skorup <[email protected]> >> wrote: >> >>> No. Unless you mean NAT. I messed with NAT. Unexplained latency issues, >>> so I switched that customer back to bridge. The first one I tried. Of >>> course that was a couple releases ago. >>> >>> >>> On 6/21/2016 10:38 PM, Josh Luthman wrote: >>> >>>> >>>> Has anyone used this? Doesn't seem to be working for me... >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> >>> >> >> > >
