Sadly, no. Cambium changed the port on the 450i drastically enough that a different electronic circuit is needed to drive it hard enough
The only currently shipping product we have which will drive the Aux port hard enough for the 450i is the syncbox12, and only revision i0 or later of that product. There is also a replacement for the syncpipe deluxe (SyncBox Junior, Deluxe Version) which should be on the website for ordering within the next 24 hours or so. But anything else you might have just won't be compatible due to the changes on the aux port on the 450i. On Tue, Jul 5, 2016 at 11:21 AM, Matt <[email protected]> wrote: > There is not a way to plug syncpipe into aux port on 450i and generate > sync? > > Looking at powering a PMP450i off a old CMM that outputs 24 volts POE. > I can use a Tycon 24 to 48 volt POE converter(TP-POE-2456D) to power > up the 450i but I have no sync. Site I have limited space on and no > time to rebuild at moment. > > > > > On Mon, Jun 20, 2016 at 8:42 PM, Forrest Christian (List Account) > <[email protected]> wrote: > > Syncbox or syncinjector rev I0 or later > > > > Earlier syncinjectors might get a reprieve but the electrical interface > on > > the 450i aux port is enough different that earlier timing port devices > won't > > work. > > > > On Jun 20, 2016 12:29 PM, "Matt" <[email protected]> wrote: > >> > >> Is there a way to make a syncpipe work with 450i yet? > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
