I know the pictures are on Debbie's short list, along with getting jumper setting instructions up on the website.
The 1U model is a completely different beast. The underlying circuitry is the same, but at this point, the design integrates a new web interface (doesn't rely on sitemonitor base unit). We're at the stage where we have quite a few products which we expect to all be shipping in the next couple/few months. I'm not sure which ones will end up going first. A lot of them are in the stages where we have to wait for an external party to make things happen - parts to arrive, or a prototype case, or similar - our schedule because of this gets driven by when external items complete. On Mon, Jul 25, 2016 at 9:13 AM, Matt <[email protected]> wrote: > Forrest, how is the 1u syncinjector coming? When with the PowerInjector > Plus images be updated? I imagine the 1u model is simply based on this? > > > On Tue, Jul 5, 2016 at 9:39 PM, Forrest Christian (List Account) < > [email protected]> wrote: > >> Sadly, no. Cambium changed the port on the 450i drastically enough >> that a different electronic circuit is needed to drive it hard enough >> >> The only currently shipping product we have which will drive the Aux port >> hard enough for the 450i is the syncbox12, and only revision i0 or later of >> that product. There is also a replacement for the syncpipe deluxe >> (SyncBox Junior, Deluxe Version) which should be on the website for >> ordering within the next 24 hours or so. But anything else you might have >> just won't be compatible due to the changes on the aux port on the 450i. >> >> On Tue, Jul 5, 2016 at 11:21 AM, Matt <[email protected]> >> wrote: >> >>> There is not a way to plug syncpipe into aux port on 450i and generate >>> sync? >>> >>> Looking at powering a PMP450i off a old CMM that outputs 24 volts POE. >>> I can use a Tycon 24 to 48 volt POE converter(TP-POE-2456D) to power >>> up the 450i but I have no sync. Site I have limited space on and no >>> time to rebuild at moment. >>> >>> >>> >>> >>> On Mon, Jun 20, 2016 at 8:42 PM, Forrest Christian (List Account) >>> <[email protected]> wrote: >>> > Syncbox or syncinjector rev I0 or later >>> > >>> > Earlier syncinjectors might get a reprieve but the electrical >>> interface on >>> > the 450i aux port is enough different that earlier timing port devices >>> won't >>> > work. >>> > >>> > On Jun 20, 2016 12:29 PM, "Matt" <[email protected]> wrote: >>> >> >>> >> Is there a way to make a syncpipe work with 450i yet? >>> >> >> >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> [email protected] | http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
