I'm kinda torn on what I could use ASAP. Either the 12-port DIN rail or
the rack mount. There are so many projects and I could really use both.
I'd say whatever you're confident in that you can get going first, just
do that and we will buy it. Ordered a couple of the GigE Power Injector
+ Sync units to get us by.
On 7/25/2016 8:37 PM, Forrest Christian (List Account) wrote:
I know the pictures are on Debbie's short list, along with getting
jumper setting instructions up on the website.
The 1U model is a completely different beast. The underlying
circuitry is the same, but at this point, the design integrates a new
web interface (doesn't rely on sitemonitor base unit). We're at the
stage where we have quite a few products which we expect to all be
shipping in the next couple/few months. I'm not sure which ones will
end up going first. A lot of them are in the stages where we have to
wait for an external party to make things happen - parts to arrive, or
a prototype case, or similar - our schedule because of this gets
driven by when external items complete.
On Mon, Jul 25, 2016 at 9:13 AM, Matt <[email protected]
<mailto:[email protected]>> wrote:
Forrest, how is the 1u syncinjector coming? When with the
PowerInjector Plus images be updated? I imagine the 1u model is
simply based on this?
On Tue, Jul 5, 2016 at 9:39 PM, Forrest Christian (List Account)
<[email protected] <mailto:[email protected]>> wrote:
Sadly, no. Cambium changed the port on the 450i drastically
enough that a different electronic circuit is needed to drive
it hard enough
The only currently shipping product we have which will drive
the Aux port hard enough for the 450i is the syncbox12, and
only revision i0 or later of that product. There is also a
replacement for the syncpipe deluxe (SyncBox Junior, Deluxe
Version) which should be on the website for ordering within
the next 24 hours or so. But anything else you might have
just won't be compatible due to the changes on the aux port on
the 450i.
On Tue, Jul 5, 2016 at 11:21 AM, Matt
<[email protected]
<mailto:[email protected]>> wrote:
There is not a way to plug syncpipe into aux port on 450i
and generate sync?
Looking at powering a PMP450i off a old CMM that outputs
24 volts POE.
I can use a Tycon 24 to 48 volt POE
converter(TP-POE-2456D) to power
up the 450i but I have no sync. Site I have limited space
on and no
time to rebuild at moment.
On Mon, Jun 20, 2016 at 8:42 PM, Forrest Christian (List
Account)
<[email protected] <mailto:[email protected]>> wrote:
> Syncbox or syncinjector rev I0 or later
>
> Earlier syncinjectors might get a reprieve but the
electrical interface on
> the 450i aux port is enough different that earlier
timing port devices won't
> work.
>
> On Jun 20, 2016 12:29 PM, "Matt"
<[email protected]
<mailto:[email protected]>> wrote:
>>
>> Is there a way to make a syncpipe work with 450i yet?
--
*Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT
59602
[email protected] <mailto:[email protected]> |
http://www.packetflux.com <http://www.packetflux.com/>
<http://www.linkedin.com/in/fwchristian>
<http://facebook.com/packetflux> <http://twitter.com/@packetflux>
--
*Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
[email protected] <mailto:[email protected]> |
http://www.packetflux.com <http://www.packetflux.com/>
<http://www.linkedin.com/in/fwchristian>
<http://facebook.com/packetflux> <http://twitter.com/@packetflux>
